3073283 Phoenix Contact Terminal Blocks

Product Details

• Rated surge voltage
  6 kV
• Insulating material group
  I
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Setpoint
  1 N
• Result of thermal test
  Test passed
• Nominal cross section
  4 mm²
• Degree of pollution
  3
• Shock protection test specification
  IEC 60529:2001-02
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short-time current
  0.48 kA
• Oscillation, broadband noise test result
  Test passed
• Shock test result
  Test passed
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Screw thread
  M3
Connection in acc. with standard
CSA
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Internal cylindrical gage
A4
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
ETIM 3.0
EC000886
ETIM 7.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of levels
1
Color
blue
Maximum power dissipation for nominal condition
1.02 W
Nominal current IN
20 A (with 4 mm² conductor cross section)
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Stripping length
9 mm
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
26
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 2.0
EC000886
UNSPSC 12.01
39121424
UNSPSC 19.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Maximum load current
20 A (with 6 mm² conductor cross section)
Nominal voltage UN
500 V
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
ASD level
1.857 (m/s2)2/Hz
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
6.2 mm
Height NS 35/15
55 mm
Tightening torque max
0.8 Nm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 5.1
27141100
UNSPSC 6.01
30211827
UNSPSC 7.0901
39121424
Note
Current and voltage are determined by the plug used.
Potentials
1
Insulating material
PA
Overvoltage category
III
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
57.8 mm
Connection method
Screw connection
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 7.0
27141126
ETIM 4.0
EC000897
UNSPSC 20.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Tightening torque, min
0.6 Nm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 11
39121424
UNSPSC 18.0
39121410