3074130 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Insulating material
  PA
• Overvoltage category
  III
• Nominal current IN
  125 A
• Finger protection
  guaranteed
• Bending test turns
  135
• Conductor cross section tensile test
  35 mm²
• Tight fit on carrier
  NS 35
• Potentials
  1
• Setpoint
  10 N
• Insulating material group
  I
• Open side panel
  No
• Power frequency withstand voltage setpoint
  2.2 kV
• Color
  gray
• Degree of pollution
  3
• Maximum load current
  125 A
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 (+/- 2) rpm
• Tensile test result
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock test result
Test passed
Number of shocks per direction
3
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Note
Terminal point
Number of levels
1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
16 mm
Height NS 35/7,5
62 mm
Connection in acc. with standard
IEC 60947-7-1
Rated surge voltage
8 kV
Nominal voltage UN
1000 V
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
10 mm² / 2 kg
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Test duration per axis
5 h
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
69.5 mm
Tightening torque max
3.7 Nm
Conductor cross section flexible max.
35 mm²
Conductor cross section AWG max.
2
Max. AWG conductor cross section, flexible
2
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
6 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Nominal cross section
35 mm²
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
4.06 W
Surge voltage test setpoint
9.6 kV
Tractive force setpoint
190 N
Result of voltage-drop test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
54.5 mm
Connection method
Screw connection
Conductor cross section solid min.
10 mm²
Min. AWG conductor cross section, flexible
8
2 conductors with same cross section, solid max.
16 mm²
2 conductors with same cross section, stranded max.
10 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Screw thread
M6
Stripping length
16 mm
Conductor cross section AWG min.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
2 conductors with same cross section, solid min.
6 mm²
2 conductors with same cross section, stranded min.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 11
39121410
Tightening torque, min
3.2 Nm
Conductor cross section solid max.
35 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
6 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible min.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410