3209523 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 10.0.1
  27141120
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ETIM 6.0
  EC000897
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ETIM 4.0
  EC000897
• UNSPSC 12.01
  39121410
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• ECLASS 7.0
  27141120
• ETIM 2.0
  EC000897
• UNSPSC 13.2
  39121410
• ETIM 7.0
  EC000897
• UNSPSC 11
  39121410
• UNSPSC 21.0
  39121410
• ECLASS 5.0
  27141100
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Bending test turns
  135
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
35.3 mm
Number of positions
1
Nominal cross section
2.5 mm²
Nominal current IN
24 A (at 2.5 mm²)
Overvoltage category
III
Connection method
Push-in connection
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Insulating material
PA
Degree of pollution
3
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W
Result of surge voltage test
Test passed
Setpoint
1 N
Tensile test result
Test passed
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid min.
0.34 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ECLASS 4.1
27141100
Potentials
1
Flammability rating according to UL 94
V0
Maximum load current
28 A (with 4 mm² conductor cross section, rigid)
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection
1 level
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Number of connections
2
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Color
blue
Rated surge voltage
8 kV
Width
5.2 mm
Height NS 35/7,5
36.5 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
ECLASS 5.1
27141100
Number of levels
1
Area of application
Railway industry
Nominal voltage UN
800 V
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
48.5 mm
Height NS 35/15
44 mm
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410