3211797 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible max.
  6 mm²
• ECLASS 5.0
  27141100
• UNSPSC 20.0
  39121410
• UNSPSC 19.0
  39121410
• ETIM 2.0
  EC000897
• UNSPSC 21.0
  39121410
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ETIM 7.0
  EC000897
• UNSPSC 7.0901
  39121410
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Nominal cross section
  4 mm²
• Rated surge voltage
  8 kV
• Maximum power dissipation for nominal condition
  1.02 W
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Bending test rotation speed
  10 rpm
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Conductor cross section short circuit testing
  6 mm²
• Ageing test for screwless modular terminal block temperature cycles
  192
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of connections
4
Color
gray
Insulating material group
I
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Short circuit stability result
Test passed
Setpoint
1 N
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Potentials
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Maximum load current
36 A (with 6 mm² conductor cross section, rigid)
Result of power-frequency withstand voltage test
Test passed
Finger protection
guaranteed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection
1 level
Insulating material
PA
Degree of pollution
3
Nominal current IN
32 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Open side panel
Yes
Bending test turns
135
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Short-time current
0.72 kA
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock test result
Test passed
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
End cover width
2.2 mm
Height NS 35/15
44 mm
Conductor cross section solid min.
0.5 mm²
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Number of levels
1
Area of application
Railway industry
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
Height NS 35/7,5
36.5 mm
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 4.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 11
39121410
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
UNSPSC 12.01
39121410
ECLASS 7.0
27141120
ETIM 6.0
EC000897
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
Test directions
X-, Y- and Z-axis (pos. and neg.)
Length
77 mm
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Connection in acc. with standard
CSA
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Internal cylindrical gage
A4
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 3.0
EC000897
Height
35.3 mm