Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

3213949 Phoenix Contact Terminal Blocks

Phoenix Contact 3213949 Installation ground terminal block, Push-in connection, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
Phoenix Contact

Part#:3213949

Manufacturer:Phoenix Contact

Product Lifecycle:Active

In-stock parts: 3399

Dec 23, 2024

Installation ground terminal block, Push-in connection, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 3213949 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Potentials
    2
  • Rated surge voltage
    4 kV
  • Maximum load current
    30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
  • Back of the hand protection
    guaranteed
  • Power frequency withstand voltage setpoint
    1.89 kV
  • Result of power-frequency withstand voltage test
    Test passed
  • Bending test conductor cross section/weight
    0.14 mm² / 0.2 kg
  • Setpoint
    1 N
  • Degree of pollution
    3
  • Shock protection test specification
    DIN EN 50274 (VDE 0660-514):2002-11
  • Nominal current IN
    24 A (with 4 mm² conductor cross section)
  • Tensile test result
    Test passed
  • Requirement temperature-rise test
    Increase in temperature ≤ 45 K
  • Result of thermal test
    Test passed
  • Result of aging test
    Test passed
  • Acceleration
    5g
  • Shock duration
    30 ms
  • Static insulating material application in cold
    -60 °C
  • Smoke gas toxicity NFPA 130 (SMP 800C)
    passed
  • Width
    5.2 mm
  • Height NS 35/7,5
    50.5 mm
  • ECLASS 11.0
    27141125
  • Nominal cross section
    4 mm²
  • Flammability rating according to UL 94
    V0
  • Open side panel
    Yes
  • Result of surge voltage test
    Test passed
  • Result of flexion and pull-out test
    Test passed
  • Result of tight fit on support
    Test passed
  • Result of temperature-rise test
    Test passed
  • Ageing test for screwless modular terminal block temperature cycles
    192
  • Test duration per axis
    5 h
  • Shock form
    Half-sine
  • Relative insulation material temperature index (Elec., UL 746 B)
    130 °C
  • Specific optical density of smoke NFPA 130 (ASTM E 662)
    passed
  • End cover width
    2.2 mm
  • Length
    101 mm
  • Stripping length
    8 mm ... 10 mm
  • Min. AWG conductor cross section, flexible
    26
  • Max. AWG conductor cross section, flexible
    12
  • Conductor cross section flexible, with ferrule with plastic sleeve max.
    2.5 mm²
  • Number of levels
    3
  • ECLASS 4.0
    27141100
  • ECLASS 5.0
    27141100
  • ECLASS 7.0
    27141125
  • ETIM 6.0
    EC001329
  • UNSPSC 11
    39121410
  • UNSPSC 20.0
    39121410
  • ECLASS 4.1
    27141100
  • ETIM 7.0
    EC001329
  • UNSPSC 13.2
    39121410
  • UNSPSC 21.0
    39121410
  • Ambient temperature (assembly)
    -5 °C ... 70 °C
  • ECLASS 6.0
    27141100
  • ECLASS 5.1
    27141100
  • UNSPSC 7.0901
    39121410
  • UNSPSC 12.01
    39121410
  • Test specification, oscillation, broadband noise
    DIN EN 50155 (VDE 0115-200):2008-03
  • Test specification, shock test
    DIN EN 50155 (VDE 0115-200):2008-03
  • Calorimetric heat release NFPA 130 (ASTM E 1354)
    27,5 MJ/kg
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 3
  • Height
    48.6 mm
  • Height NS 35/15
    58 mm
  • Conductor cross section AWG max.
    12
  • Conductor cross section flexible, with ferrule without plastic sleeve max.
    2.5 mm²
  • Connection cross sections directly pluggable
    0.34 mm² 4 mm²
  • Internal cylindrical gage
    A3
  • China RoHS
    Environmentally friendly use period: unlimited = EFUP-e
  • UNSPSC 19.0
    39121410
  • Overvoltage category
    III
  • Result of voltage-drop test
    Test passed
  • Short circuit stability result
    Test passed
  • Short-time current
    0.48 kA
  • Oscillation, broadband noise test result
    Test passed
  • Shock test result
    Test passed
  • Number of shocks per direction
    3
  • Fire protection for rail vehicles (DIN EN 45545-2) R26
    HL 1 - HL 3
  • Connection
    1st, 2nd and 3rd level
  • Conductor cross section solid max.
    4 mm²
  • Conductor cross section flexible, with ferrule without plastic sleeve min.
    0.34 mm²
  • Permissible humidity (storage/transport)
    30 % ... 70 %
  • UNSPSC 6.01
    30211811
  • UNSPSC 18.0
    39121410
  • Number of connections
    5
  • Maximum power dissipation for nominal condition
    1.02 W (the value is multiplied when connecting multiple levels)
  • Nominal voltage UN
    400 V (phase conductor/phase conductor)
  • Finger protection
    guaranteed
  • Bending test rotation speed
    10 rpm
  • Conductor cross section short circuit testing
    4 mm²
  • Color
    gray
  • Test spectrum
    Service life test category 1, class B, body mounted
  • Test frequency
    f1 = 5 Hz to f2 = 150 Hz
  • Surface flammability NFPA 130 (ASTM E 162)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 3
  • Note
    Please observe the current carrying capacity of the DIN rails.
  • Conductor cross section solid min.
    0.34 mm²
  • Conductor cross section flexible max.
    4 mm²
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
    0.5 mm²
  • Ambient temperature (storage/transport)
    -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
  • ECLASS 10.0.1
    27141125
  • ETIM 4.0
    EC000897
  • ECLASS 9.0
    27141125
  • Insulating material
    PA
  • Insulating material group
    I
  • Note regarding shock protection
    Depending on the end application with regard to the busbar.
  • Result of the test for mechanical stability of terminal points (5 x conductor connection)
    Test passed
  • Bending test turns
    135
  • Tight fit on carrier
    NS 35
  • Proof of thermal characteristics (needle flame) effective duration
    30 s
  • ASD level
    0.964 (m/s2)2/Hz
  • Test directions
    X-, Y- and Z-axis (pos. and neg.)
  • Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
    125 °C
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 3
  • Connection method
    Push-in connection
  • Conductor cross section AWG min.
    26
  • Conductor cross section flexible min.
    0.14 mm²
  • Conductor cross section flexible, with ferrule with plastic sleeve min.
    0.34 mm²
  • Operating temperature
    -60 °C ... 105 °C (max. short-term operating temperature 130°C)
  • Connection in acc. with standard
    CUL

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


This item can ship within 24h!

1-year warranty

$7.07

Stock:

3,399

Select Qty:

$7.07

$7.07 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo