3215041 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  2
• Color
  gray
• Rated surge voltage
  6 kV
• Maximum load current
  26 A (with 4 mm² conductor cross section, rigid)
• Result of surge voltage test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Conductor cross section short circuit testing
  4 mm²
• Result of aging test
  Test passed
• Result of thermal test
  Test passed
• Number of connections
  4
• Nominal voltage UN
  500 V
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/7,5
  47.5 mm
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section AWG max.
  12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141127
ECLASS 5.1
27141100
ETIM 6.0
EC000903
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Nominal cross section
2.5 mm²
Overvoltage category
III
Open side panel
Yes
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
55 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Stripping length
10 mm
ECLASS 10.0.1
27141127
ECLASS 9.0
27141127
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Note
The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A.
Degree of pollution
3
Flammability rating according to UL 94
V0
Nominal current IN
20 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
68 mm
End cover width
2.2 mm
Connection method
Push-in connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
ECLASS 6.0
27141100
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000903
UNSPSC 19.0
39121410
UNSPSC 13.2
39121410
Finger protection
guaranteed
Result of tight fit on support
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Insulating material
PA
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Insulating material group
I
Surge voltage test setpoint
7.3 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Setpoint
1 N
Test spectrum
Service life test category 2, bogie-mounted