3260052 Phoenix Contact Terminal Blocks

Product Details

• Acceleration
  30g
• Oscillation, broadband noise test result
  Test passed
• Nominal cross section
  50 mm²
• Degree of pollution
  3
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Stripping length
  30 mm ... 32 mm
• ASD level
  6.12 (m/s2)2/Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Connection
  1 level
• Height NS 35/15
  105 mm
• Conductor cross section AWG min.
  8
• Max. AWG conductor cross section, flexible
  2/0
• Cross section with insertion bridge solid min.
  10 mm²
• Cross section with insertion bridge stranded, with ferrule with plastic sleeve max.
  50 mm²
• Cross section with insertion bridge stranded, with ferrule without plastic sleeve min.
  10 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
Number of levels
1
Rated surge voltage
8 kV
Finger protection
guaranteed
Back of the hand protection
guaranteed
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
101 mm
Connection in acc. with standard
IEC 60947-7-1
Connection method
Power-Turn connection
Number of positions
1
Color
green-yellow
Flammability rating according to UL 94
V0
Open side panel
No
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Note
Use an appropriate NS 35... copper or aluminum DIN rail for connection cross sections > 35 mm²/2 AWG.
Conductor cross section solid max.
70 mm²
Min. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
10 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
20 mm
Conductor cross section solid min.
10 mm²
Conductor cross section flexible min.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
50 mm²
Connection cross sections directly pluggable
10 mm² 70 mm² 8 2/0
ECLASS 10.0.1
27141141
Number of connections
2
Insulating material group
I
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
10 mm²
Cross section with insertion bridge, stranded max.
50 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141141
ETIM 7.0
EC000901
UNSPSC 20.0
39121410
ETIM 6.0
EC000901
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section AWG max.
2/0
ECLASS 9.0
27141141
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Overvoltage category
III
Test duration per axis
5 h
Permissible humidity (storage/transport)
30 % ... 70 %
Insulating material
PA
Cross section with insertion bridge stranded, with ferrule without plastic sleeve max.
50 mm²
ECLASS 5.0
27141100
UNSPSC 19.0
39121410
Conductor cross section flexible max.
70 mm²
Cross section with insertion bridge stranded min.
10 mm²
ECLASS 5.1
27141100
Internal cylindrical gage
A10
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
50 mm²
Cross section with insertion bridge, solid max.
50 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141141