3274122 Phoenix Contact Terminal Blocks
Part#:3274122
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 82
Dec 23, 2024
Distribution block, Block with horizontal alignment, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 690 V, nominal current: 24 A, connection method: Push-in connection,
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3274122 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Note The max. load current must not be exceeded by the total current of all connected conductors.
- Nominal cross section 2.5 mm²
- Rated surge voltage 8 kV
- Overvoltage category III
- Back of the hand protection guaranteed
- Power frequency withstand voltage setpoint 1.89 kV
- Bending test conductor cross section/weight 0.14 mm² / 0.2 kg
- Tight fit on carrier NS 35
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Oscillation, broadband noise test result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Shock form Half-sine
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Stripping length 8 mm ... 10 mm
- Conductor cross section AWG min. 26
- Conductor cross section flexible min. 0.14 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 10.0.1 27141120
- ETIM 3.0 EC000897
- Potentials 1
- Insulating material PA
- Insulating material group I
- Maximum load current 32 A
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Finger protection guaranteed
- Number of connections 12
- Degree of pollution 3
- Nominal voltage UN 690 V
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of tight fit on support Test passed
- Short circuit stability result Test passed
- Short-time current 0.48 kA
- Test duration per axis 5 h
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Width 31.5 mm
- Connection method Push-in connection
- Min. AWG conductor cross section, flexible 26
- Max. AWG conductor cross section, flexible 14
- Internal cylindrical gage A3
- ECLASS 11.0 27141120
- ECLASS 4.1 27141121
- ECLASS 7.0 27141120
- ETIM 7.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
- Number of levels 1
- Flammability rating according to UL 94 V0
- Maximum total current 48 A
- Result of surge voltage test Test passed
- Bending test rotation speed 10 rpm
- Setpoint 1 N
- Conductor cross section short circuit testing 4 mm²
- Result of aging test Test passed
- Acceleration 30g
- Shock test result Test passed
- Number of shocks per direction 3
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Length 28.6 mm
- Connection in acc. with standard IEC 60947-7-1
- Conductor cross section AWG max. 12
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.0 27141121
- ECLASS 9.0 27141120
- ETIM 6.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 18.0 39121410
- Color gray
- Maximum power dissipation for nominal condition 0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Nominal current IN 24 A
- Open side panel No
- Result of power-frequency withstand voltage test Test passed
- Bending test turns 135
- Result of voltage-drop test Test passed
- Ageing test for screwless modular terminal block temperature cycles 192
- Test spectrum Service life test category 2, bogie-mounted
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm²
- ECLASS 5.0 27141120
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 19.0 39121410
- UNSPSC 21.0 39121410
- Result of flexion and pull-out test Test passed
- Tensile test result Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock duration 18 ms
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height NS 15 31.4 mm
- Conductor cross section solid min. 0.34 mm²
- Conductor cross section flexible max. 2.5 mm²
- Connection cross sections directly pluggable 0.34 mm² 4 mm² 24 12
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 5.1 27141120
- ECLASS 6.0 27141100
- UNSPSC 6.01 30211811
- UNSPSC 12.01 39121410
- Permissible humidity (storage/transport) 30 % ... 70 %
- Ambient temperature (actuation) -5 °C ... 70 °C
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$5.36
Stock:
82
Select Qty:
$5.36
$5.36 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨