5022106 Phoenix Contact Terminal Blocks

Product Details

• UNSPSC 21.0
  39121410
• Color
  black
• Maximum power dissipation for nominal condition
  2.43 W
• Fuse
  G / 5 x 20 / 5 x 25 / 5 x 30 / 6.3 x 32
• Open side panel
  No
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Length
  61 mm
• Height NS 35/7,5
  51.6 mm
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.5 mm²
• 2 conductors with same cross section, stranded min.
  0.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  6 mm²
• Screw thread
  M4
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 11.0
  27141116
• ECLASS 6.0
  27141100
• ETIM 7.0
  EC000899
• UNSPSC 12.01
  39121411
• Insulating material
  PA
• Degree of pollution
  3
• Nominal voltage UN
  500 V (As a fuse terminal block)
Maximum power dissipation
max. 2.5 W (with single arrangement of the fuse terminal block in the event of overload)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 32
56.6 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
2 conductors with same cross section, solid max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
Stripping length
13 mm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ETIM 2.0
EC000899
UNSPSC 11
39121411
UNSPSC 19.0
39121410
Nominal current IN
10 A (is determined by the fuse used)
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
59.1 mm
Conductor cross section solid max.
16 mm²
Conductor cross section flexible max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Cross section with insertion bridge, stranded max.
16 mm²
2 conductors with same cross section, solid min.
0.5 mm²
Tightening torque, min
1.5 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 3.0
EC000899
UNSPSC 7.0901
39121411
ETIM 6.0
EC000899
UNSPSC 18.0
39121410
Rated surge voltage
6 kV
Maximum load current
40 A (As a disconnect terminal block)
Fuse type
Glass / ceramics / ...
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
10.2 mm
Conductor cross section AWG min.
20
Cross section with insertion bridge, solid max.
16 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000899
UNSPSC 20.0
39121410
Overvoltage category
III
Surface flammability NFPA 130 (ASTM E 162)
passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible min.
0.5 mm²
Conductor cross section AWG max.
6
2 conductors with same cross section, stranded max.
6 mm²
Connection method
Screw connection
Tightening torque max
1.8 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141116
ECLASS 9.0
27141116
ECLASS 7.0
27141116
UNSPSC 6.01
30211812
UNSPSC 13.2
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Flammability rating according to UL 94
V0
Insulating material group
I
Number of connections
2
Connection in acc. with standard
IEC 60947-7-3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Nominal cross section
16 mm²
Number of levels
1
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C