​
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

PILZ-400441 Pilz Emergency Stop Push Buttons

Pilz PILZ-400441 Pilz PILZ-400441 is a push-button designed for emergency stop functions with a contact block set suitable for front panel mounting. It operates within an ambient air temperature range of -25 to +55°C and has a net height of 92 mm. This part is specifically designed for the hygienic range, featuring a round button with a 31.5mm head diameter and a 22.3mm installation diameter. It supports a rated current of 2A at 24Vdc (DC-13), 3A at 250Vac (AC-15), with a minimum contact current of 5mA and a thermal current (Ith) of 10A. The connection is made through spring-loaded terminal connections, and it boasts an IP69K degree of protection. The material of the contact is AgNi, and the button is red. The net width of the part is 44 mm. It employs a rotational release type operating mode, allowing for turning left or right to release. The storage temperature range is -50 to +85°C. It has 0 Normally Open (NO) auxiliary contacts and 2 Normally Closed (NC) auxiliary contacts with self-monitoring, ensuring a response time of 10ms / 0.01 s. The rated insulation voltage (Ui) is 250 V, and it has a mechanical durability of 6050 operations at no load.
Pilz

Part#:PILZ-400441

Manufacturer:Pilz

Product Lifecycle:Active

Get a quick Quote!

Pilz PILZ-400441 is a push-button designed for emergency stop functions with a contact block set suitable for front panel mounting. It operates within an ambient air temperature range of -25 to +55°C and has a net height of 92 mm. This part is specifically designed for the hygienic range, featuring a round button with a 31.5mm head diameter and a 22.3mm installation diameter. It supports a rated current of 2A at 24Vdc (DC-13), 3A at 250Vac (AC-15), with a minimum contact current of 5mA and a thermal current (Ith) of 10A. The connection is made through spring-loaded terminal connections, and it boasts an IP69K degree of protection. The material of the contact is AgNi, and the button is red. The net width of the part is 44 mm. It employs a rotational release type operating mode, allowing for turning left or right to release. The storage temperature range is -50 to +85°C. It has 0 Normally Open (NO) auxiliary contacts and 2 Normally Closed (NC) auxiliary contacts with self-monitoring, ensuring a response time of 10ms / 0.01 s. The rated insulation voltage (Ui) is 250 V, and it has a mechanical durability of 6050 operations at no load.

About the manufacturer: Pilz is one of the manufacturers that offers Emergency Stop Push Buttons that you can order at marketplace.quotebeam.com. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-400441 Pilz price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

PILZ-400441 Description

Pilz PILZ-400441 is a push-button designed for emergency stop functions with a contact block set suitable for front panel mounting. It operates within an ambient air temperature range of -25 to +55°C and has a net height of 92 mm. This part is specifically designed for the hygienic range, featuring a round button with a 31.5mm head diameter and a 22.3mm installation diameter. It supports a rated current of 2A at 24Vdc (DC-13), 3A at 250Vac (AC-15), with a minimum contact current of 5mA and a thermal current (Ith) of 10A. The connection is made through spring-loaded terminal connections, and it boasts an IP69K degree of protection. The material of the contact is AgNi, and the button is red. The net width of the part is 44 mm. It employs a rotational release type operating mode, allowing for turning left or right to release. The storage temperature range is -50 to +85°C. It has 0 Normally Open (NO) auxiliary contacts and 2 Normally Closed (NC) auxiliary contacts with self-monitoring, ensuring a response time of 10ms / 0.01 s. The rated insulation voltage (Ui) is 250 V, and it has a mechanical durability of 6050 operations at no load.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Pilz

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Pilz Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pilz Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pilz, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

PILZ-772021 Part Image. Manufactured by Pilz.

PILZ-772021

Verified stock: 0

Pilz PILZ-772021 is a communications unit designed for expansion and communication tasks within automation systems. It features a Modbus TCP fieldbus interface for peripheral devices and ensures galvanic isolation to protect against electrical interference. This unit is suitable for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 120 mm, with a compact PC housing material. It connects via an RJ45 connector and supports a maximum cable length of 100m per input. The PILZ-772021 operates on a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 3.23-3.37Vdc (3.3Vdc nominal) supplied via the base unit, with a power consumption of 1W. It offers a degree of protection rated at IP20 and can withstand storage temperatures ranging from -25 to +70°C. The rated insulation voltage (Ui) is 30 V, ensuring compatibility with a wide range of industrial applications.

Pilz

PILZ-772020 Part Image. Manufactured by Pilz.

PILZ-772020

Verified stock: 0

Pilz PILZ-772020 is a Safety I/O unit designed for the safe connection of Decentralized I/O modules. It features a digital output connection module with a mounting mode of DIN rail (35mmx7.5mm; top hat) and DIN rail (27mm; recess width). The unit operates within an ambient air temperature range of 0 to +60 °C and has a net height of 100 mm. It offers plug-in/detachable screw or spring-loaded terminal connections, supporting 2 points per spring-loaded connection with a 9mm stripping length. As part of the Safe I/O module sub-range, it has an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal). The housing is made of PC material, and it can accommodate a maximum cable length of 1000m per input. The net width and depth are 22.5 mm and 120 mm, respectively. Cable cross-section compatibility ranges from 0.25 to 2.5mm2 / 24AWG to 12AWG for 1-core flexible with screw connection, 0.2 to 1.5mm2 / 24AWG to 16AWG for 2-core flexible without crimp connectors or with TWIN crimp connectors with screw connection, and 0.2 to 2.5mm2 / 24AWG to 12AWG for spring connection. Power consumption is 5 W for output of external power supply at no load and 101 W for module supply. It is designed for storage in ambient air temperatures ranging from -25 to +70 °C. The unit features 1 x digital output (test pulse; 4A), with a rated impulse voltage (Uimp) of 2.5 kV, rated insulation voltage (Ui) of 30 V, and various time delays including 35ms for switch-off delay, 5s for switch-on delay, 20ms for supply interruption before de-energization, and 15ms for maximum input delay.

Pilz

PILZ-504220 Part Image. Manufactured by Pilz.

PILZ-504220

Verified stock: 0

Pilz PILZ-504220 is a non-contact door switch designed for magnetic safety applications. It operates within an ambient air temperature range of -10 to +55°C and features a design suitable for actuator protective cap series connection for electronic/electromechanical relay systems. This model has a rated current of 0.5A for the safety-contact maximum current and utilizes a 4-pin M8 male connector for its connection type. With dimensions of W26mm x H36mm x L13mm, it offers a compact form factor. The PILZ-504220 is equipped with an IP65 and IP67 degree of protection, ensuring durability against dust and water ingress. Its square switch and actuator shape are housed in a yellow PBT material, providing a distinct appearance while maintaining robustness. The switch operates at a rated voltage of 24Vdc and features a sensing distance ranging from 8mm (Sao) to 26mm (Sar). It includes 2 Normally Open (NO) auxiliary contacts with a contact type of 2NO (safety contact; reed), and it does not have Normally Closed (NC) auxiliary contacts.

Pilz

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo