​
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

PILZ-772030 Pilz Logic Controllers & Displays

Pilz PILZ-772030 Pilz PILZ-772030 is a communications unit designed for expansion and communication purposes, featuring a single serial interface. It is intended for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 120 mm. Connection is facilitated through plug-in/detachable screw or spring-loaded terminals, supporting 2 points per spring-loaded connection with a 9mm stripping length. As part of the Communication module sub-range, it offers an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 3.23-3.37Vdc (3.3Vdc nominal) supplied via the base unit. The housing is made from PC material. The communication protocol supported is RS-232. It accommodates a wire cross-section of 0.25 to 2.5mm2 / 24AWG to 12AWG for 1-core flexible with screw connection, 0.2 to 1.5mm2 / 24AWG to 16AWG for 2-core with the same cross-section, flexible without crimp connectors or with TWIN crimp connectors for screw connection, and 0.2 to 2.5mm2 / 24AWG to 12AWG for spring connection. The power consumption from the supply via the base unit is 0.03 W. The unit is designed for storage in ambient air temperatures ranging from -25 to +70°C and has a rated insulation voltage (Ui) of 30 V.
Pilz

Part#:PILZ-772030

Manufacturer:Pilz

Product Lifecycle:Active

Get a quick Quote!

Pilz PILZ-772030 is a communications unit designed for expansion and communication purposes, featuring a single serial interface. It is intended for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 120 mm. Connection is facilitated through plug-in/detachable screw or spring-loaded terminals, supporting 2 points per spring-loaded connection with a 9mm stripping length. As part of the Communication module sub-range, it offers an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 3.23-3.37Vdc (3.3Vdc nominal) supplied via the base unit. The housing is made from PC material. The communication protocol supported is RS-232. It accommodates a wire cross-section of 0.25 to 2.5mm2 / 24AWG to 12AWG for 1-core flexible with screw connection, 0.2 to 1.5mm2 / 24AWG to 16AWG for 2-core with the same cross-section, flexible without crimp connectors or with TWIN crimp connectors for screw connection, and 0.2 to 2.5mm2 / 24AWG to 12AWG for spring connection. The power consumption from the supply via the base unit is 0.03 W. The unit is designed for storage in ambient air temperatures ranging from -25 to +70°C and has a rated insulation voltage (Ui) of 30 V.

About the manufacturer: Pilz is one of the manufacturers that offers Logic Controllers & Displays that you can order at marketplace.quotebeam.com. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-772030 Pilz price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

PILZ-772030 Description

Pilz PILZ-772030 is a communications unit designed for expansion and communication purposes, featuring a single serial interface. It is intended for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 120 mm. Connection is facilitated through plug-in/detachable screw or spring-loaded terminals, supporting 2 points per spring-loaded connection with a 9mm stripping length. As part of the Communication module sub-range, it offers an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 3.23-3.37Vdc (3.3Vdc nominal) supplied via the base unit. The housing is made from PC material. The communication protocol supported is RS-232. It accommodates a wire cross-section of 0.25 to 2.5mm2 / 24AWG to 12AWG for 1-core flexible with screw connection, 0.2 to 1.5mm2 / 24AWG to 16AWG for 2-core with the same cross-section, flexible without crimp connectors or with TWIN crimp connectors for screw connection, and 0.2 to 2.5mm2 / 24AWG to 12AWG for spring connection. The power consumption from the supply via the base unit is 0.03 W. The unit is designed for storage in ambient air temperatures ranging from -25 to +70°C and has a rated insulation voltage (Ui) of 30 V.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Pilz

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Pilz Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pilz Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pilz, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

PILZ-632390 Part Image. Manufactured by Pilz.

PILZ-632390

Verified stock: 0

Pilz PILZ-632390 is a safety light curtain designed for finger protection, capable of detecting opaque objects as small as 14mm. This robust type receiver part operates within an ambient air temperature range of -10 to +60°C and offers a protective height of 1800mm. It features a 5-pin M12 connector for both emitter and receiver, falling under the PSEN opII4F sub-range. The device is encased in an aluminium housing with zinc end caps and a PC front screen, ensuring a degree of protection rated at IP65. With a supply voltage requirement of 18-28.8Vdc (24Vdc nominal), it supports a maximum cable length of 50m and has a net width of 35mm and a depth of 40mm. The sensing distance ranges from 0.2m to 8m, utilizing infrared LED light with a wavelength of 850 nm. Power consumption is max 1.5 W for the emitter and max 2.5 W for the receiver without load. It also features two digital outputs (100mA) for the receiver OSSD outputs and has a response time of 20ms / 0.02 s with beam coding and 91.4ms / 0.0914 s. The device is designed for storage in temperatures ranging from -25 to +70°C.

Pilz

PILZ-632113 Part Image. Manufactured by Pilz.

PILZ-632113

Verified stock: 0

Pilz PILZ-632113 is a safety light curtain designed for body protection, capable of detecting opaque objects as small as 300mm across an operating range of 10m to 55m. This emitter and receiver pair, part of the PSEN opII3B sub-range, features a robust design with an aluminium housing, zinc end caps, and a PC front screen. It operates within an ambient air temperature range of -10 to +60 °C for operation and -25 to +70 °C for storage. The device offers a protective height of 1200mm and dimensions of 1204mm in height, 35mm in width, and 40mm in depth. It connects via 5-pin M12 connectors for both the emitter and receiver, ensuring a secure connection. The PILZ-632113 is designed to work with a supply voltage of 18-28.8Vdc (24Vdc nominal) and has a maximum power consumption of 1.5W for the emitter and 2.5W for the receiver without load. It features two digital outputs (100mA) for the receiver OSSD outputs, an infrared LED light source with a wavelength of 850 nm, and a degree of protection rated at IP65, making it suitable for various industrial environments. The response time is 5.2ms / 0.0052 s with beam coding and 11.7ms / 0.0117 s, with a maximum cable length of 50m.

Pilz

PILZ-630802 Part Image. Manufactured by Pilz.

PILZ-630802

Verified stock: 0

Pilz PILZ-630802 is a safety light curtain designed for body protection with a muting option. It operates within an ambient air temperature range of -10 to +50 °C and has a net height of 953 mm. This part features an emitter and receiver pair, with the emitter connecting via a 4-pin M12 connector and the receiver via a 5-pin M12 connector. It belongs to the Basic sub-range and offers a protective height of 800mm. The PILZ-630802 is IP65 rated, indicating protection against dust ingress and low-pressure water jets from any direction. It requires a 24Vdc supply voltage and is constructed with an aluminium housing. The net width and depth are 35 mm and 41.2 mm, respectively. This safety light curtain has a sensing distance operating range of 0.5m to 50m and uses infrared LED light with a wavelength of 880 nm. It is designed to detect 415mm opaque objects across 3 beams with a 415mm beam gap. For storage, it can withstand ambient air temperatures from -25 to +70 °C. Additionally, it features 2 x digital outputs (500mA) for the receiver OSSD outputs and has a response time of 14ms. The resolution is specifically set at 415mm for body protection.

Pilz

PILZ-542005 Part Image. Manufactured by Pilz.

PILZ-542005

Verified stock: 0

Pilz PILZ-542005 is a non-contact door switch featuring complete RFID transponder safety switch support for SDD. It operates within an ambient air temperature range of -25 to +70°C and is designed as an actuated coded switch with a slim profile, incorporating 2 safety inputs for series connection and 1-actuation direction with 3 approach directions. This part connects via an 8-pin M12 male connector and has dimensions of W101.6mm x H26.4mm x L19mm. It offers a degree of protection rated at IP66 and IP67, ensuring durability in various environments. The supply voltage required is 24Vdc, and it has a rectangular shape. The sensing distance is specified as 11mm operating distance at square marking, with 8mm (Sao) and 20mm (Sar), while consuming 1W of power. Additionally, it features 2 x digital outputs (OSSD safety outputs; semiconductor; 100mA) for enhanced functionality.

Pilz

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo