Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

RSS 36-SD-R-ST Schmersal Electronic Components

Schmersal RSS 36-SD-R-ST Safety sensors; Electronic safety sensors; Universal coding with RFID technology; 1 x connector socket M12, 8-pole; Actuation from side; Max. 31 sensors can be wired in series.; serial diagnostic output; Thermoplastic enclosure; RFID-technology for needs-
Schmersal

Part#:RSS 36-SD-R-ST

Manufacturer:Schmersal

Alt. Part#:101217290

Product Lifecycle:Active

Get a quick Quote!

Safety sensors; Electronic safety sensors; Universal coding with RFID technology; 1 x connector socket M12, 8-pole; Actuation from side; Max. 31 sensors can be wired in series.; serial diagnostic output; Thermoplastic enclosure; RFID-technology for needs-

About the manufacturer: Schmersal is one of the manufacturers that offers Electronic Components that you can order at marketplace.quotebeam.com. Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.

Check out the RSS 36-SD-R-ST Schmersal price in the box on the right side or send a quick quote.

Product Details

  • EMC rating
    IEC 60947-3
  • Interfering radiation
    IEC 61000-6-4
  • Current, Utilisation category DC13
    0.25 A
  • Voltage, Utilisation category DC13
    24 VDC
  • Voltage, Utilisation category DC12
    24 VDC
  • Current, Utilisation category DC12
    0.25 A
  • Current leakage Ir
    0.5 mA
  • Versions
    p-type
  • Rated operating current (safety outputs)
    250 mA
  • Voltage drop Ud, maximum
    2 V
  • Output current, (fail-safe output), maximum
    0.25 A
  • Switching frequency, approx.
    1 Hz
  • Operating current
    150 mA
  • Required rated short-circuit current to EN 60947-5-1
    100 A
  • Rated operating voltage
    24 VDC −15 % / +10 %
  • Rated operating voltage, minimum
    20.4 VDC
  • Rated operating voltage, maximum
    26.4 VDC
  • No-load supply current I0
    100 mA
  • Voltage type
    DC (direct current)
  • Degree of pollution to VDE 0100
    3
  • Rated insulation voltage Ui
    32 VDC
  • Overvoltage category
    III
  • Protection rating
    III
  • Rated impulse withstand voltage Uimp
    0.8 kV
  • Restistance to shock
    30 g / 11 ms
  • Resistance to vibrations to EN 60068-2-6
    10 … 55 Hz, amplitude 1 mm
  • Material temperature resistance (long-term), maximum
    +105 °C
  • Ambient temperature, maximum
    +70 °C
  • Material temperature resistance of the cable (in motion), minimum
    -10 °C
  • Storage and transport temperature, minimum
    -25 °C
  • Material temperature resistance of the cable (at rest), minimum
    -30 °C
  • Degree of protection
    IP65 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
  • Storage and transport temperature, maximum
    +85 °C
  • Ambient temperature, minimum
    -25 °C
  • Height of sensor
    25 mm
  • Width of sensor
    106.3 mm
  • Terminal Connector
    Connector M12, 8-pole
  • Note
    The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current
  • Length of sensor
    22 mm
  • Latching force
    18 N
  • Ensured switch distance OFF Sar
    20 mm
  • Switch distance
    12 mm
  • Ensured switch distance ON Sao
    10 mm
  • Mounting
    A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.
  • Note (Repeat accuracy R)
    Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
  • Number of Series-wiring of sensors
    31
  • Repeat accuracy R R
    0.5 mm
  • Number of fail-safe digital outputs
    2
  • Actuating panels
    lateral
  • Hysteresis (Switch distance), maximum
    2 mm
  • Number of semi-conductor outputs with signaling function
    1
  • Number of LEDs
    3
  • Integral System Diagnostics, status
    Yes
  • Short-circuit recognition
    Yes
  • Short circuit detection
    Yes
  • Latching
    Yes
  • Cascadable
    Yes
  • Serial diagnostics
    Yes
  • Safety functions
    Yes
  • Duration of risk, maximum
    200 ms
  • Reaction time, maximum
    100 ms
  • Diagnostic output
    Yes
  • general information
    Universal coding
  • Housing construction form
    Block
  • Standards
    IEC 60947-5-3
  • Coding level according to ISO 14119
    Low
  • Time to readiness, maximum
    2,000 ms
  • Active principle
    RFID
  • Active area
    lateral
  • Sensor topology
    Sensor for series wiring
  • Installation conditions (mechanical)
    not flush
  • Gross weight
    100 g
  • Enclosure material
    Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents RSS 36-SD-R-ST Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Schmersal

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Schmersal Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schmersal Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schmersal, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo