RSS260-I2-D-ST Schmersal Safety Switches
Part#:RSS260-I2-D-ST
Manufacturer:Schmersal
Alt. Part#:103003607
Product Lifecycle:Active
Get a quick Quote!
RSS260-I2-D-ST Schmersal - Safety sensors; Electronic safety sensors; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Thermoplastic enclosure; Simple mounting without addition
About the manufacturer: Schmersal is one of the manufacturers that offers Safety Switches that you can order at marketplace.quotebeam.com. Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.
Check out the RSS260-I2-D-ST Schmersal price in the box on the right side or send a quick quote.
Product Details
- EMC rating IEC 60947-3
- Interfering radiation IEC 61000-6-4
- Voltage, Utilisation category DC13 24 VDC
- Current, Utilisation category DC12 0.05 A
- Voltage, Utilisation category DC12 24 VDC
- Current, Utilisation category DC13 0.05 A
- Current leakage Ir 0.5 mA
- Versions p-type
- Switching frequency, approx. 1 Hz
- Voltage drop Ud, maximum 2 V
- Operating current 50 mA
- Rated operating voltage, maximum 26.4 VDC
- Rated operating voltage 24 VDC -15% / +10%
- Required rated short-circuit current to EN 60947-5-1 100 A
- Rated operating voltage, minimum 20.4 VDC
- No-load supply current I0 100 mA
- Overvoltage category III
- Voltage type DC (direct current)
- Degree of pollution to VDE 0100 3
- Rated impulse withstand voltage Uimp 0.8 kV
- Rated insulation voltage Ui 32 VDC
- Restistance to shock 30 g / 11 ms
- Resistance to vibrations to EN 60068-2-6 10 … 55 Hz, amplitude 1 mm
- Storage and transport temperature, maximum +85 °C
- Ambient temperature, maximum +65 °C
- Degree of protection IP65 to EN 60529, IP67 to EN 60529
- Storage and transport temperature, minimum -25 °C
- Height of sensor 18 mm
- Ambient temperature, minimum -25 °C
- Note The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
- Terminal Connector Connector M8
- Ensured switching distance ON, front 10 mm
- Length of sensor 29.5 mm
- Ensured switch distance OFF Sar, lateral 15 mm
- Width of sensor 39.2 mm
- Ensured switching distance ON, side 6 mm
- Ensured switching distance OFF, front 18 mm
- Switch distance Sn front 12 mm, lateral 9 mm
- Note (Repeat accuracy R) Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
- Hysteresis (Switch distance), maximum 2 mm
- Mounting A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
- Integral System Diagnostics, status Yes
- Number of LEDs 3
- Actuating panels lateral, front side
- Repeat accuracy R R 0.5 mm
- Number of fail-safe digital outputs 2
- Number of semi-conductor outputs with signaling function 1
- Short-circuit recognition Yes
- Duration of risk, maximum 200 ms
- Safety functions Yes
- Short circuit detection Yes
- Time to readiness, maximum 2,000 ms
- Reaction time, maximum 100 ms
- Diagnostic output Yes
- Cascadable Yes
- Gross weight 61 g
- Active area lateral, front
- Standards IEC 60947-5-3
- Active principle RFID
- Housing construction form Block
- Sensor topology Sensor for series wiring
- Coding level according to ISO 14119 High
- Enclosure material Plastic, thermoplastic, self-extinguishing
- Installation conditions (mechanical) not flush
- general information Individual coding, multiple teaching
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
RSS260-I2-D-ST Description
RSS260-I2-D-ST Schmersal - Safety sensors; Electronic safety sensors; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Thermoplastic enclosure; Simple mounting without addition
Related documents RSS260-I2-D-ST Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Schmersal
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Schmersal Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schmersal Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schmersal, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
