Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

ATV61HD90M3X Schneider Electric Industrial Automation Components

Schneider Electric ATV61HD90M3X Schneider Electric ATV61HD90M3X is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control with a U/F ratio that supports 2 points, 5 points, and energy-saving modes. It features sensorless flux vector control in standard and energy-saving configurations, and vector control without speed feedback capable of delivering 120% of the nominal motor torque. This model comes with a built-in heatsink in a coated version for enhanced durability, operates on a supply voltage of 170-264Vac (200Vac / 220Vac / 230Vac / 240Vac nom.), and measures H1022mm x W360mm x D377mm. It has a conformal coating for chemical resistance, an IP20 UL type 1 degree of protection, and supports a rated current of 359A at 230Vac; 2.5kHz with a maximum current of 431A for 60 seconds. Designed for wall mounting, it uses Modbus and CANopen communication protocols, is compatible with a 3-phase network, and outputs frequencies from 0.1-500 Hz. The device includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) plus 1 additional digital input programmable as discrete or PTC input and another for PWR safety, along with 1 digital output (C/O SPDT relay contact) and 1 digital output (NO relay contact). It also features 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA), with a current consumption of 336A at 200Vac and 288A at 240Vac. The rated active power is 90kW, and the rated power is 125HP.

Schneider Electric

Part#:ATV61HD90M3X

Manufacturer:Schneider Electric

Product Lifecycle:Active

Get a quick Quote!

Schneider Electric ATV61HD90M3X is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control with a U/F ratio that supports 2 points, 5 points, and energy-saving modes. It features sensorless flux vector control in standard and energy-saving configurations, and vector control without speed feedback capable of delivering 120% of the nominal motor torque. This model comes with a built-in heatsink in a coated version for enhanced durability, operates on a supply voltage of 170-264Vac (200Vac / 220Vac / 230Vac / 240Vac nom.), and measures H1022mm x W360mm x D377mm. It has a conformal coating for chemical resistance, an IP20 UL type 1 degree of protection, and supports a rated current of 359A at 230Vac; 2.5kHz with a maximum current of 431A for 60 seconds. Designed for wall mounting, it uses Modbus and CANopen communication protocols, is compatible with a 3-phase network, and outputs frequencies from 0.1-500 Hz. The device includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) plus 1 additional digital input programmable as discrete or PTC input and another for PWR safety, along with 1 digital output (C/O SPDT relay contact) and 1 digital output (NO relay contact). It also features 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA), with a current consumption of 336A at 200Vac and 288A at 240Vac. The rated active power is 90kW, and the rated power is 125HP.

About the manufacturer: Schneider Electric is one of the manufacturers that offers Industrial Automation Components that you can order at marketplace.quotebeam.com. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.

Check out the ATV61HD90M3X Schneider Electric price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

ATV61HD90M3X Description

Schneider Electric ATV61HD90M3X is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control with a U/F ratio that supports 2 points, 5 points, and energy-saving modes. It features sensorless flux vector control in standard and energy-saving configurations, and vector control without speed feedback capable of delivering 120% of the nominal motor torque. This model comes with a built-in heatsink in a coated version for enhanced durability, operates on a supply voltage of 170-264Vac (200Vac / 220Vac / 230Vac / 240Vac nom.), and measures H1022mm x W360mm x D377mm. It has a conformal coating for chemical resistance, an IP20 UL type 1 degree of protection, and supports a rated current of 359A at 230Vac; 2.5kHz with a maximum current of 431A for 60 seconds. Designed for wall mounting, it uses Modbus and CANopen communication protocols, is compatible with a 3-phase network, and outputs frequencies from 0.1-500 Hz. The device includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) plus 1 additional digital input programmable as discrete or PTC input and another for PWR safety, along with 1 digital output (C/O SPDT relay contact) and 1 digital output (NO relay contact). It also features 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA), with a current consumption of 336A at 200Vac and 288A at 240Vac. The rated active power is 90kW, and the rated power is 125HP.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Schneider Electric

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Schneider Electric Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schneider Electric Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schneider Electric, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

ATV630U75N4

Verified stock: 50

Schneider Electric ATV630U75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, installation energy drift detection, and embedded Ethernet for direct system configuration and monitoring. This model integrates actual pump curves to optimize system operating points and limits overvoltage at motor terminals. It offers continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H350mm x W171mm x D203mm, and a degree of protection of IP21 UL type 1. The rated current is 16.5A (normal-duty; 4kHz), 12.7A (heavy-duty; 4kHz), with a maximum current of 18.2A (normal-duty; for 60s) and 19.1A (heavy-duty; for 60s). It supports wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. There are also 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs for various signal types. The current consumption is specified for different voltages and duties, with a rated active power of 7.5kW (normal-duty) and 5.5kW (heavy-duty), corresponding to 10HP (normal-duty) and 7.5HP (heavy-duty).

Schneider Electric

ATV61HU22M3

Verified stock: 0

Schneider Electric ATV61HU22M3 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for controlling motor speed by varying the supply frequency. It features sensorless flux vector control in standard and energy-saving modes, and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. This model comes with a built-in EMC filter (class C2) and a built-in heatsink. It operates on a supply voltage of 170-264Vac (200Vac / 220Vac / 230Vac / 240Vac nom.) and has dimensions of H260mm x W155mm x D187mm. The ATV61HU22M3 offers an IP20 UL type 1 degree of protection and supports wall mounting. It has a rated current of 11A (230Vac; 12kHz; 3-phase), 8A (230Vac; 12kHz; single-phase), with a maximum current of 9.6A (single-phase; for 60s) and 13.2A (3-phase; for 60s). Communication is facilitated via Modbus and CANopen protocols, and it is compatible with both single-phase (1P) and 3-phase (3P) networks, outputting frequencies from 0.1 to 599 Hz. The drive includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) programmable as LI1-LI5, 1 digital input programmable as discrete or PTC input (LI6), and 1 PWR safety input, alongside 1 digital output (C/O SPDT relay contact) (R1) and 1 digital output (NO relay contact) (R2). It also features 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA). The current consumption is specified as 18.2A (200Vac; 1.5kW; single-phase), 15A (200Vac; 2.2kW; 3-phase), 15.7A (240Vac; 1.5kW; single-phase), and 12.8A (240Vac; 2.2kW; 3-phase), with a rated active power of 2.2kW (3-phase) and 1.5kW (single-phase), equivalent to 3HP (3-phase) and 2HP (single-phase).

Schneider Electric

ATV630U07N4

Verified stock: 0

Schneider Electric ATV630U07N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features a built-in EMC filter (class C2), ATEX compliance, and is designed for wall mounting with an IP21 UL type 1 degree of protection. This part operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.) and has dimensions of H350mm x W144mm x D203mm. It supports a network frequency output of 0.1-500 Hz on a 3-phase network and offers various functions including STO (Safe Torque Off up to SIL3), constant and variable load torque standards, optimized torque mode for PM motors, sensorless estimated flow rate, and accurate measurement with installation energy drift detection. The ATV630U07N4 facilitates embedded Ethernet for direct access to system configuration and monitoring, integration of actual pump curves, limitation of overvoltage at motor terminals, and features for predictive and preventive maintenance tracking. It has a rated current of 2.2A (normal-duty; 4kHz), 1.5A (heavy-duty; 4kHz), with maximum currents of 2.4A (normal-duty; for 60s) and 2.3A (heavy-duty; for 60s). Communication is enabled via Modbus, Modbus TCP, and Ethernet protocols. It includes 2 analog outputs (0-10Vdc / 0-20mA), 4+2 programmable digital inputs (24Vdc; sink/source), 1 digital input for STO, 1 digital output (C/O SPDT relay contact), and 2 digital outputs (NO relay contacts), along with 3 analog inputs for versatile connectivity. The rated active power is 750W / 0.75kW (normal-duty) and 370W / 0.37kW (heavy-duty), with rated power of 1HP (normal-duty) and 1/2HP (heavy-duty).

Schneider Electric

ATV66U41N4U

Verified stock: 0

SPEED DRIVE 460VAC 3HP ATV66 CT

Schneider Electric

This item can ship within 5 days!

ATV630D11N4

$2,177.50

Verified stock: 1

Schneider Electric ATV630D11N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features a built-in EMC filter (class C2), ATEX compliance, and offers functions such as Safe Torque Off up to SIL3, constant and variable load torque standards, optimized torque mode for PM (permanent magnet) motors, sensorless estimated flow rate, accurate measurement, and installation energy drift detection. This model supports embedded Ethernet for direct system configuration and monitoring, integrates actual pump curves for system optimization, limits overvoltage at motor terminals, and provides continuous and historical real-time measurements with customizable dashboards. It also includes predictive and preventive maintenance tracking functions. The drive operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), has dimensions of H350mm x W171mm x D203mm, and offers a degree of protection of IP21 UL type 1. It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet communication protocols. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 analog outputs (0-10Vdc / 0-20mA), 4+2 programmable digital inputs (24Vdc; sink/source), 1 digital input for Safe Torque Off (24Vdc; source), and 3 digital outputs. The analog inputs consist of 1 input (0-10Vdc / 0-20mA / 4-20mA) and 2 inputs (0-10Vdc / 0-20mA / 4-20mA / PTC / Pt100 / Pt1000 / KTY84). The rated current is 23.5A for normal-duty and 16.5A for heavy-duty operations at 4kHz, with a maximum current of 25.9A (normal-duty) and 24.8A (heavy-duty) for 60 seconds. Current consumption is specified at 19.8A (380Vac; normal-duty) and 14.1A (380Vac; heavy-duty) for 380Vac, and 17A (480Vac; normal-duty) and 12.5A (480Vac; heavy-duty) for 480Vac. The rated active power is 11kW for normal-duty and 7.5kW for heavy-duty, with a rated power of 15HP (normal-duty) and 10HP (heavy-duty).

Schneider Electric

ATV630U75N4

Verified stock: 50

Schneider Electric ATV630U75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, installation energy drift detection, and embedded Ethernet for direct system configuration and monitoring. This model integrates actual pump curves to optimize system operating points and limits overvoltage at motor terminals. It offers continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H350mm x W171mm x D203mm, and a degree of protection of IP21 UL type 1. The rated current is 16.5A (normal-duty; 4kHz), 12.7A (heavy-duty; 4kHz), with a maximum current of 18.2A (normal-duty; for 60s) and 19.1A (heavy-duty; for 60s). It supports wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. There are also 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs for various signal types. The current consumption is specified for different voltages and duties, with a rated active power of 7.5kW (normal-duty) and 5.5kW (heavy-duty), corresponding to 10HP (normal-duty) and 7.5HP (heavy-duty).

Schneider Electric

ATV61HU22M3

Verified stock: 0

Schneider Electric ATV61HU22M3 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for controlling motor speed by varying the supply frequency. It features sensorless flux vector control in standard and energy-saving modes, and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. This model comes with a built-in EMC filter (class C2) and a built-in heatsink. It operates on a supply voltage of 170-264Vac (200Vac / 220Vac / 230Vac / 240Vac nom.) and has dimensions of H260mm x W155mm x D187mm. The ATV61HU22M3 offers an IP20 UL type 1 degree of protection and supports wall mounting. It has a rated current of 11A (230Vac; 12kHz; 3-phase), 8A (230Vac; 12kHz; single-phase), with a maximum current of 9.6A (single-phase; for 60s) and 13.2A (3-phase; for 60s). Communication is facilitated via Modbus and CANopen protocols, and it is compatible with both single-phase (1P) and 3-phase (3P) networks, outputting frequencies from 0.1 to 599 Hz. The drive includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) programmable as LI1-LI5, 1 digital input programmable as discrete or PTC input (LI6), and 1 PWR safety input, alongside 1 digital output (C/O SPDT relay contact) (R1) and 1 digital output (NO relay contact) (R2). It also features 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA). The current consumption is specified as 18.2A (200Vac; 1.5kW; single-phase), 15A (200Vac; 2.2kW; 3-phase), 15.7A (240Vac; 1.5kW; single-phase), and 12.8A (240Vac; 2.2kW; 3-phase), with a rated active power of 2.2kW (3-phase) and 1.5kW (single-phase), equivalent to 3HP (3-phase) and 2HP (single-phase).

Schneider Electric

ATV630U07N4

Verified stock: 0

Schneider Electric ATV630U07N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features a built-in EMC filter (class C2), ATEX compliance, and is designed for wall mounting with an IP21 UL type 1 degree of protection. This part operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.) and has dimensions of H350mm x W144mm x D203mm. It supports a network frequency output of 0.1-500 Hz on a 3-phase network and offers various functions including STO (Safe Torque Off up to SIL3), constant and variable load torque standards, optimized torque mode for PM motors, sensorless estimated flow rate, and accurate measurement with installation energy drift detection. The ATV630U07N4 facilitates embedded Ethernet for direct access to system configuration and monitoring, integration of actual pump curves, limitation of overvoltage at motor terminals, and features for predictive and preventive maintenance tracking. It has a rated current of 2.2A (normal-duty; 4kHz), 1.5A (heavy-duty; 4kHz), with maximum currents of 2.4A (normal-duty; for 60s) and 2.3A (heavy-duty; for 60s). Communication is enabled via Modbus, Modbus TCP, and Ethernet protocols. It includes 2 analog outputs (0-10Vdc / 0-20mA), 4+2 programmable digital inputs (24Vdc; sink/source), 1 digital input for STO, 1 digital output (C/O SPDT relay contact), and 2 digital outputs (NO relay contacts), along with 3 analog inputs for versatile connectivity. The rated active power is 750W / 0.75kW (normal-duty) and 370W / 0.37kW (heavy-duty), with rated power of 1HP (normal-duty) and 1/2HP (heavy-duty).

Schneider Electric

This item can ship within 5 days!

ATV630D11N4

$2,177.50

Verified stock: 1

Schneider Electric ATV630D11N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features a built-in EMC filter (class C2), ATEX compliance, and offers functions such as Safe Torque Off up to SIL3, constant and variable load torque standards, optimized torque mode for PM (permanent magnet) motors, sensorless estimated flow rate, accurate measurement, and installation energy drift detection. This model supports embedded Ethernet for direct system configuration and monitoring, integrates actual pump curves for system optimization, limits overvoltage at motor terminals, and provides continuous and historical real-time measurements with customizable dashboards. It also includes predictive and preventive maintenance tracking functions. The drive operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), has dimensions of H350mm x W171mm x D203mm, and offers a degree of protection of IP21 UL type 1. It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet communication protocols. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 analog outputs (0-10Vdc / 0-20mA), 4+2 programmable digital inputs (24Vdc; sink/source), 1 digital input for Safe Torque Off (24Vdc; source), and 3 digital outputs. The analog inputs consist of 1 input (0-10Vdc / 0-20mA / 4-20mA) and 2 inputs (0-10Vdc / 0-20mA / 4-20mA / PTC / Pt100 / Pt1000 / KTY84). The rated current is 23.5A for normal-duty and 16.5A for heavy-duty operations at 4kHz, with a maximum current of 25.9A (normal-duty) and 24.8A (heavy-duty) for 60 seconds. Current consumption is specified at 19.8A (380Vac; normal-duty) and 14.1A (380Vac; heavy-duty) for 380Vac, and 17A (480Vac; normal-duty) and 12.5A (480Vac; heavy-duty) for 480Vac. The rated active power is 11kW for normal-duty and 7.5kW for heavy-duty, with a rated power of 15HP (normal-duty) and 10HP (heavy-duty).

Schneider Electric

ATV630U75N4

Verified stock: 50

Schneider Electric ATV630U75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, installation energy drift detection, and embedded Ethernet for direct system configuration and monitoring. This model integrates actual pump curves to optimize system operating points and limits overvoltage at motor terminals. It offers continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H350mm x W171mm x D203mm, and a degree of protection of IP21 UL type 1. The rated current is 16.5A (normal-duty; 4kHz), 12.7A (heavy-duty; 4kHz), with a maximum current of 18.2A (normal-duty; for 60s) and 19.1A (heavy-duty; for 60s). It supports wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. There are also 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs for various signal types. The current consumption is specified for different voltages and duties, with a rated active power of 7.5kW (normal-duty) and 5.5kW (heavy-duty), corresponding to 10HP (normal-duty) and 7.5HP (heavy-duty).

Schneider Electric

Do you have questions?

We’re here for you ✨

We are a proud member of: