Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

ATV61HU22N4 Schneider Electric Industrial Automation Components

Schneider Electric ATV61HU22N4 Schneider Electric ATV61HU22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for three-phase networks with a supply voltage of 323-528Vac, including nominal voltages of 380Vac, 400Vac, 480Vac, and 500Vac. It features sensorless flux vector control, vector control without speed feedback, and offers 120% of the nominal motor torque. The unit includes a built-in DC choke, an EMC filter of class C2/C3, and a built-in heatsink. It has a degree of protection of IP20 UL type 1 and is designed for wall mounting. The ATV61HU22N4 supports Modbus and CANopen communication protocols, operates with an output network frequency of 0.1-599 Hz, and has dimensions of H230mm x W130mm x D175mm. It provides one analog output (0-10Vdc / 0-20mA), five digital inputs (24Vdc; sink/source) that are programmable, plus one additional digital input programmable as discrete or PTC input, and one for PWR safety. There are also two digital outputs, one being a C/O SPDT relay contact and the other a NO relay contact. The drive includes two analog inputs, one accepting -10...+10Vdc and the other 0-10Vdc / 0-20mA signals. Its rated current at 380Vac with a 12kHz frequency is 5.8A, at 460Vac is 4.8A, and it can handle a maximum current of 6.9A for 60 seconds. The rated active power is 2.2kW, and the rated power in horsepower is 3HP.

Schneider Electric

Part#:ATV61HU22N4

Manufacturer:Schneider Electric

Product Lifecycle:Active

Get a quick Quote!

Schneider Electric ATV61HU22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for three-phase networks with a supply voltage of 323-528Vac, including nominal voltages of 380Vac, 400Vac, 480Vac, and 500Vac. It features sensorless flux vector control, vector control without speed feedback, and offers 120% of the nominal motor torque. The unit includes a built-in DC choke, an EMC filter of class C2/C3, and a built-in heatsink. It has a degree of protection of IP20 UL type 1 and is designed for wall mounting. The ATV61HU22N4 supports Modbus and CANopen communication protocols, operates with an output network frequency of 0.1-599 Hz, and has dimensions of H230mm x W130mm x D175mm. It provides one analog output (0-10Vdc / 0-20mA), five digital inputs (24Vdc; sink/source) that are programmable, plus one additional digital input programmable as discrete or PTC input, and one for PWR safety. There are also two digital outputs, one being a C/O SPDT relay contact and the other a NO relay contact. The drive includes two analog inputs, one accepting -10...+10Vdc and the other 0-10Vdc / 0-20mA signals. Its rated current at 380Vac with a 12kHz frequency is 5.8A, at 460Vac is 4.8A, and it can handle a maximum current of 6.9A for 60 seconds. The rated active power is 2.2kW, and the rated power in horsepower is 3HP.

About the manufacturer: Schneider Electric is one of the manufacturers that offers Industrial Automation Components that you can order at marketplace.quotebeam.com. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.

Check out the ATV61HU22N4 Schneider Electric price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

ATV61HU22N4 Description

Schneider Electric ATV61HU22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for three-phase networks with a supply voltage of 323-528Vac, including nominal voltages of 380Vac, 400Vac, 480Vac, and 500Vac. It features sensorless flux vector control, vector control without speed feedback, and offers 120% of the nominal motor torque. The unit includes a built-in DC choke, an EMC filter of class C2/C3, and a built-in heatsink. It has a degree of protection of IP20 UL type 1 and is designed for wall mounting. The ATV61HU22N4 supports Modbus and CANopen communication protocols, operates with an output network frequency of 0.1-599 Hz, and has dimensions of H230mm x W130mm x D175mm. It provides one analog output (0-10Vdc / 0-20mA), five digital inputs (24Vdc; sink/source) that are programmable, plus one additional digital input programmable as discrete or PTC input, and one for PWR safety. There are also two digital outputs, one being a C/O SPDT relay contact and the other a NO relay contact. The drive includes two analog inputs, one accepting -10...+10Vdc and the other 0-10Vdc / 0-20mA signals. Its rated current at 380Vac with a 12kHz frequency is 5.8A, at 460Vac is 4.8A, and it can handle a maximum current of 6.9A for 60 seconds. The rated active power is 2.2kW, and the rated power in horsepower is 3HP.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Schneider Electric

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Schneider Electric Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schneider Electric Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schneider Electric, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

ATV630D75Y6

Verified stock: 0

Schneider Electric ATV630D75Y6 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct access to system configuration and monitoring, integration of actual pump curves for system optimization, limitation of overvoltage at motor terminals, and supports continuous and historical real-time measurements with customizable dashboards. Predictive and preventive maintenance tracking functions are included. It has a built-in EMC filter (class C3), operates on a supply voltage of 425-759Vac, and comes in dimensions of H630mm x W331mm x D297mm with an IP00 degree of protection. The rated current is 83A for normal-duty and 66A for heavy-duty operations at 2.5kHz, with a maximum current of 91.3A for normal-duty and 99A for heavy-duty operations for 60 seconds. Wall mounting is supported. Communication protocols include Modbus, Modbus TCP, and Ethernet/IP, suitable for a 3-phase network with an output frequency range of 0.1-599 Hz. It features 2 analog outputs, 6 programmable digital inputs with additional inputs for Safe Torque Off, 3 digital outputs, and 3 analog inputs supporting various signal types. Current consumption varies with voltage and duty, with rated active power of 55kW to 75kW and rated power of 75HP to 100HP, depending on the operating conditions.

Schneider Electric

This item can ship within 5 days!

ATV630D11N4

$2,177.50

Verified stock: 1

Schneider Electric ATV630D11N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features a built-in EMC filter (class C2), ATEX compliance, and offers functions such as Safe Torque Off up to SIL3, constant and variable load torque standards, optimized torque mode for PM (permanent magnet) motors, sensorless estimated flow rate, accurate measurement, and installation energy drift detection. This model supports embedded Ethernet for direct system configuration and monitoring, integrates actual pump curves for system optimization, limits overvoltage at motor terminals, and provides continuous and historical real-time measurements with customizable dashboards. It also includes predictive and preventive maintenance tracking functions. The drive operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), has dimensions of H350mm x W171mm x D203mm, and offers a degree of protection of IP21 UL type 1. It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet communication protocols. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 analog outputs (0-10Vdc / 0-20mA), 4+2 programmable digital inputs (24Vdc; sink/source), 1 digital input for Safe Torque Off (24Vdc; source), and 3 digital outputs. The analog inputs consist of 1 input (0-10Vdc / 0-20mA / 4-20mA) and 2 inputs (0-10Vdc / 0-20mA / 4-20mA / PTC / Pt100 / Pt1000 / KTY84). The rated current is 23.5A for normal-duty and 16.5A for heavy-duty operations at 4kHz, with a maximum current of 25.9A (normal-duty) and 24.8A (heavy-duty) for 60 seconds. Current consumption is specified at 19.8A (380Vac; normal-duty) and 14.1A (380Vac; heavy-duty) for 380Vac, and 17A (480Vac; normal-duty) and 12.5A (480Vac; heavy-duty) for 480Vac. The rated active power is 11kW for normal-duty and 7.5kW for heavy-duty, with a rated power of 15HP (normal-duty) and 10HP (heavy-duty).

Schneider Electric

ATV630D18N4

Verified stock: 0

Schneider Electric ATV630D18N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, overvoltage limitation at motor terminals, and supports predictive and preventive maintenance tracking. It includes a built-in EMC filter (class C2), is ATEX compliant, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Dimensions are H546mm x W211mm x D232mm, with an IP21 UL type 1 degree of protection. Rated current is 39.2A (normal-duty; 4kHz), 31.7A (heavy-duty; 4kHz), with a maximum current of 43.1A (normal-duty; for 60s) and 47.6A (heavy-duty; for 60s). Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Modbus TCP, and Ethernet on a 3-phase network with an output frequency of 0.1-500 Hz. It features 2 x analog outputs, 6 x digital inputs (with 2 programmable as pulse inputs), 1 x digital input for STO, 3 x digital outputs, and 3 x analog inputs. Current consumption varies by voltage and duty, with rated active power of 18.5kW (normal-duty) and 15kW (heavy-duty), corresponding to 25HP and 20HP respectively.

Schneider Electric

ATV61HU30M3S337

Verified stock: 0

Schneider Electric ATV61HU30M3S337 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series. It features variable speed/frequency drive capabilities with U/F ratio options (2 points / 5 points / energy saving), sensorless flux vector control (standard / energy saving), and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. This model includes a built-in EMC filter (class C2), a built-in heatsink, and a coated version for enhanced durability. It operates on a supply voltage of 170-264Vac (200Vac / 220Vac / 230Vac / 240Vac nom.), with dimensions of H260mm x W155mm x D187mm. The device offers chemical resistance through a conformal coating (reinforced version) and has a degree of protection rated at IP20 UL type 1. The rated current is 13.7A (230Vac; 12kHz; 3-phase), 11A (230Vac; 12kHz; single-phase), with a maximum current of 13.2A (single-phase; for 60s) and 16.4A (3-phase; for 60s). It supports wall mounting and uses Modbus and CANopen communication protocols. The type of network supported is single-phase (1P) / 3-phase (3P), with a network frequency output of 0.1-599 Hz. It includes 1 x analog output (0-10Vdc / 0-20mA), 5 x digital inputs (24Vdc; sink/source) (LI1-LI5; programmable), 1 x digital input (24Vdc; sink/source) (LI6; programmable as discrete or PTC input), 1 x digital input (24Vdc) (PWR safety input), and 2 x digital outputs (1 x C/O SPDT relay contact) (R1), (1 x NO relay contact) (R2). The analog inputs consist of 1 x (-10...+10Vdc) and 1 x (0-10Vdc / 0-20mA). Current consumption is specified as 25.9A (200Vac; 2.2kW; single-phase), 19.3A (200Vac; 3kW; 3-phase), 22.1A (240Vac; 2.2kW; single-phase), and 16.4A (240Vac; 3kW; 3-phase). The rated active power is 3kW (3-phase) and 2.2kW (single-phase), with a rated power of 3HP (single-phase).

Schneider Electric

ATV630U75N4

Verified stock: 50

Schneider Electric ATV630U75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, installation energy drift detection, and embedded Ethernet for direct system configuration and monitoring. This model integrates actual pump curves to optimize system operating points and limits overvoltage at motor terminals. It offers continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H350mm x W171mm x D203mm, and a degree of protection of IP21 UL type 1. The rated current is 16.5A (normal-duty; 4kHz), 12.7A (heavy-duty; 4kHz), with a maximum current of 18.2A (normal-duty; for 60s) and 19.1A (heavy-duty; for 60s). It supports wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. There are also 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs for various signal types. The current consumption is specified for different voltages and duties, with a rated active power of 7.5kW (normal-duty) and 5.5kW (heavy-duty), corresponding to 10HP (normal-duty) and 7.5HP (heavy-duty).

Schneider Electric

ATV630D75Y6

Verified stock: 0

Schneider Electric ATV630D75Y6 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct access to system configuration and monitoring, integration of actual pump curves for system optimization, limitation of overvoltage at motor terminals, and supports continuous and historical real-time measurements with customizable dashboards. Predictive and preventive maintenance tracking functions are included. It has a built-in EMC filter (class C3), operates on a supply voltage of 425-759Vac, and comes in dimensions of H630mm x W331mm x D297mm with an IP00 degree of protection. The rated current is 83A for normal-duty and 66A for heavy-duty operations at 2.5kHz, with a maximum current of 91.3A for normal-duty and 99A for heavy-duty operations for 60 seconds. Wall mounting is supported. Communication protocols include Modbus, Modbus TCP, and Ethernet/IP, suitable for a 3-phase network with an output frequency range of 0.1-599 Hz. It features 2 analog outputs, 6 programmable digital inputs with additional inputs for Safe Torque Off, 3 digital outputs, and 3 analog inputs supporting various signal types. Current consumption varies with voltage and duty, with rated active power of 55kW to 75kW and rated power of 75HP to 100HP, depending on the operating conditions.

Schneider Electric

This item can ship within 5 days!

ATV630D11N4

$2,177.50

Verified stock: 1

Schneider Electric ATV630D11N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features a built-in EMC filter (class C2), ATEX compliance, and offers functions such as Safe Torque Off up to SIL3, constant and variable load torque standards, optimized torque mode for PM (permanent magnet) motors, sensorless estimated flow rate, accurate measurement, and installation energy drift detection. This model supports embedded Ethernet for direct system configuration and monitoring, integrates actual pump curves for system optimization, limits overvoltage at motor terminals, and provides continuous and historical real-time measurements with customizable dashboards. It also includes predictive and preventive maintenance tracking functions. The drive operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), has dimensions of H350mm x W171mm x D203mm, and offers a degree of protection of IP21 UL type 1. It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet communication protocols. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 analog outputs (0-10Vdc / 0-20mA), 4+2 programmable digital inputs (24Vdc; sink/source), 1 digital input for Safe Torque Off (24Vdc; source), and 3 digital outputs. The analog inputs consist of 1 input (0-10Vdc / 0-20mA / 4-20mA) and 2 inputs (0-10Vdc / 0-20mA / 4-20mA / PTC / Pt100 / Pt1000 / KTY84). The rated current is 23.5A for normal-duty and 16.5A for heavy-duty operations at 4kHz, with a maximum current of 25.9A (normal-duty) and 24.8A (heavy-duty) for 60 seconds. Current consumption is specified at 19.8A (380Vac; normal-duty) and 14.1A (380Vac; heavy-duty) for 380Vac, and 17A (480Vac; normal-duty) and 12.5A (480Vac; heavy-duty) for 480Vac. The rated active power is 11kW for normal-duty and 7.5kW for heavy-duty, with a rated power of 15HP (normal-duty) and 10HP (heavy-duty).

Schneider Electric

ATV630D18N4

Verified stock: 0

Schneider Electric ATV630D18N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, overvoltage limitation at motor terminals, and supports predictive and preventive maintenance tracking. It includes a built-in EMC filter (class C2), is ATEX compliant, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Dimensions are H546mm x W211mm x D232mm, with an IP21 UL type 1 degree of protection. Rated current is 39.2A (normal-duty; 4kHz), 31.7A (heavy-duty; 4kHz), with a maximum current of 43.1A (normal-duty; for 60s) and 47.6A (heavy-duty; for 60s). Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Modbus TCP, and Ethernet on a 3-phase network with an output frequency of 0.1-500 Hz. It features 2 x analog outputs, 6 x digital inputs (with 2 programmable as pulse inputs), 1 x digital input for STO, 3 x digital outputs, and 3 x analog inputs. Current consumption varies by voltage and duty, with rated active power of 18.5kW (normal-duty) and 15kW (heavy-duty), corresponding to 25HP and 20HP respectively.

Schneider Electric

ATV61HU30M3S337

Verified stock: 0

Schneider Electric ATV61HU30M3S337 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series. It features variable speed/frequency drive capabilities with U/F ratio options (2 points / 5 points / energy saving), sensorless flux vector control (standard / energy saving), and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. This model includes a built-in EMC filter (class C2), a built-in heatsink, and a coated version for enhanced durability. It operates on a supply voltage of 170-264Vac (200Vac / 220Vac / 230Vac / 240Vac nom.), with dimensions of H260mm x W155mm x D187mm. The device offers chemical resistance through a conformal coating (reinforced version) and has a degree of protection rated at IP20 UL type 1. The rated current is 13.7A (230Vac; 12kHz; 3-phase), 11A (230Vac; 12kHz; single-phase), with a maximum current of 13.2A (single-phase; for 60s) and 16.4A (3-phase; for 60s). It supports wall mounting and uses Modbus and CANopen communication protocols. The type of network supported is single-phase (1P) / 3-phase (3P), with a network frequency output of 0.1-599 Hz. It includes 1 x analog output (0-10Vdc / 0-20mA), 5 x digital inputs (24Vdc; sink/source) (LI1-LI5; programmable), 1 x digital input (24Vdc; sink/source) (LI6; programmable as discrete or PTC input), 1 x digital input (24Vdc) (PWR safety input), and 2 x digital outputs (1 x C/O SPDT relay contact) (R1), (1 x NO relay contact) (R2). The analog inputs consist of 1 x (-10...+10Vdc) and 1 x (0-10Vdc / 0-20mA). Current consumption is specified as 25.9A (200Vac; 2.2kW; single-phase), 19.3A (200Vac; 3kW; 3-phase), 22.1A (240Vac; 2.2kW; single-phase), and 16.4A (240Vac; 3kW; 3-phase). The rated active power is 3kW (3-phase) and 2.2kW (single-phase), with a rated power of 3HP (single-phase).

Schneider Electric

ATV630U75N4

Verified stock: 50

Schneider Electric ATV630U75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, installation energy drift detection, and embedded Ethernet for direct system configuration and monitoring. This model integrates actual pump curves to optimize system operating points and limits overvoltage at motor terminals. It offers continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H350mm x W171mm x D203mm, and a degree of protection of IP21 UL type 1. The rated current is 16.5A (normal-duty; 4kHz), 12.7A (heavy-duty; 4kHz), with a maximum current of 18.2A (normal-duty; for 60s) and 19.1A (heavy-duty; for 60s). It supports wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. There are also 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs for various signal types. The current consumption is specified for different voltages and duties, with a rated active power of 7.5kW (normal-duty) and 5.5kW (heavy-duty), corresponding to 10HP (normal-duty) and 7.5HP (heavy-duty).

Schneider Electric

ATV630D75Y6

Verified stock: 0

Schneider Electric ATV630D75Y6 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct access to system configuration and monitoring, integration of actual pump curves for system optimization, limitation of overvoltage at motor terminals, and supports continuous and historical real-time measurements with customizable dashboards. Predictive and preventive maintenance tracking functions are included. It has a built-in EMC filter (class C3), operates on a supply voltage of 425-759Vac, and comes in dimensions of H630mm x W331mm x D297mm with an IP00 degree of protection. The rated current is 83A for normal-duty and 66A for heavy-duty operations at 2.5kHz, with a maximum current of 91.3A for normal-duty and 99A for heavy-duty operations for 60 seconds. Wall mounting is supported. Communication protocols include Modbus, Modbus TCP, and Ethernet/IP, suitable for a 3-phase network with an output frequency range of 0.1-599 Hz. It features 2 analog outputs, 6 programmable digital inputs with additional inputs for Safe Torque Off, 3 digital outputs, and 3 analog inputs supporting various signal types. Current consumption varies with voltage and duty, with rated active power of 55kW to 75kW and rated power of 75HP to 100HP, depending on the operating conditions.

Schneider Electric

Do you have questions?

We’re here for you ✨

We are a proud member of: