​
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

RE22R1QMU Schneider Electric Electrical Timers

Schneider Electric RE22R1QMU Schneider Electric RE22R1QMU is an analog timer designed for modular installation on a DIN rail, featuring a single function with a star-delta timer mechanism. It has two normally open outputs with a common connection and is controlled via a front panel rotary knob. The control signal pulse width is 100ms under load and 30ms, with a recovery time of 120ms upon de-energization and a power-on delay of 100ms. This timer is part of the RE22 sub-range and offers a rated current of 8 A. It provides a degree of protection of IP40 for both the front face and housing, while the terminal block is rated at IP20. The housing material is self-extinguishing, ensuring durability. Power consumption is minimal at 0.7 W for a 24Vdc supply. The RE22R1QMU features SPDT (Single Pole Double Throw) contacts, with a rated impulse voltage of 5 kV. It supports a wide supply voltage range from 24-240 V AC and 24 V DC, with a minimum of 20.4 V. The display includes a green LED for timing and power status, and a yellow LED to indicate relay energization. Its electrical durability is rated for 100,000 operations at 250Vac with a resistive load and up to 10,000,000 operations. The timer offers a wide range of time delays from 1 second to 300 hours. It operates within a temperature range of -20°C to +60°C.
Schneider Electric

Part#:RE22R1QMU

Manufacturer:Schneider Electric

Product Lifecycle:Active

Get a quick Quote!

Schneider Electric RE22R1QMU is an analog timer designed for modular installation on a DIN rail, featuring a single function with a star-delta timer mechanism. It has two normally open outputs with a common connection and is controlled via a front panel rotary knob. The control signal pulse width is 100ms under load and 30ms, with a recovery time of 120ms upon de-energization and a power-on delay of 100ms. This timer is part of the RE22 sub-range and offers a rated current of 8 A. It provides a degree of protection of IP40 for both the front face and housing, while the terminal block is rated at IP20. The housing material is self-extinguishing, ensuring durability. Power consumption is minimal at 0.7 W for a 24Vdc supply. The RE22R1QMU features SPDT (Single Pole Double Throw) contacts, with a rated impulse voltage of 5 kV. It supports a wide supply voltage range from 24-240 V AC and 24 V DC, with a minimum of 20.4 V. The display includes a green LED for timing and power status, and a yellow LED to indicate relay energization. Its electrical durability is rated for 100,000 operations at 250Vac with a resistive load and up to 10,000,000 operations. The timer offers a wide range of time delays from 1 second to 300 hours. It operates within a temperature range of -20°C to +60°C.

About the manufacturer: Schneider Electric is one of the manufacturers that offers Electrical Timers that you can order at marketplace.quotebeam.com. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.

Check out the RE22R1QMU Schneider Electric price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

RE22R1QMU Description

Schneider Electric RE22R1QMU is an analog timer designed for modular installation on a DIN rail, featuring a single function with a star-delta timer mechanism. It has two normally open outputs with a common connection and is controlled via a front panel rotary knob. The control signal pulse width is 100ms under load and 30ms, with a recovery time of 120ms upon de-energization and a power-on delay of 100ms. This timer is part of the RE22 sub-range and offers a rated current of 8 A. It provides a degree of protection of IP40 for both the front face and housing, while the terminal block is rated at IP20. The housing material is self-extinguishing, ensuring durability. Power consumption is minimal at 0.7 W for a 24Vdc supply. The RE22R1QMU features SPDT (Single Pole Double Throw) contacts, with a rated impulse voltage of 5 kV. It supports a wide supply voltage range from 24-240 V AC and 24 V DC, with a minimum of 20.4 V. The display includes a green LED for timing and power status, and a yellow LED to indicate relay energization. Its electrical durability is rated for 100,000 operations at 250Vac with a resistive load and up to 10,000,000 operations. The timer offers a wide range of time delays from 1 second to 300 hours. It operates within a temperature range of -20°C to +60°C.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Schneider Electric

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Schneider Electric Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schneider Electric Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schneider Electric, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

RE22R2CMR Part Image. Manufactured by Schneider Electric.

RE22R2CMR

Verified stock: 1

Schneider Electric RE22R2CMR is an analog timer featuring a modular design of 18mm / 1module with dual function capabilities, including an Off-delay timer with control signal and rotary knob control alongside a diagnostic button. It offers a control signal pulse width of 100ms with load in parallel and 30ms without, a recovery time of 120ms upon de-energisation, and a power-on delay of 100ms. Designed for DIN rail mounting, this timer has a rated current of 8 A and falls under the RE22 sub-range. It provides a degree of protection with IP40 for the housing, IP20 for terminals, and IP50 for the front panel. The housing material is self-extinguishing, ensuring durability. Power consumption is rated at 1.5 W for 240Vdc. The RE22R2CMR features DPDT (Double Pole Double Throw) - 2C/O contacts, with a rated impulse voltage (Uimp) of 5 kV. It supports a supply voltage range of 24-240 V AC/DC, with a minimum of 20.4 V. Display indicators include a green LED backlight for dial pointer indication, and yellow LEDs for various timing and relay status indications. Its electrical durability is rated for 100,000 operations at 250vac/24Vdc and up to 10,000,000 operations. The timer offers a wide time delay range from 1s to 300h (1 to 1,080,000 s), and operates within a temperature range of -20°C to +60°C.

Schneider Electric

RE22R1DMR Part Image. Manufactured by Schneider Electric.

RE22R1DMR

Verified stock: 0

Schneider Electric RE22R1DMR is an analog timer featuring modular design with an 18mm width equivalent to 1 module. It offers dual function timing capabilities, including Symmetrical flashing relay (starting pulse-off) with retrigger/restart control signal, adjustable via a rotary knob and a diagnostic button. The control signal pulse width is 100ms with load in parallel and 30ms without, with a recovery time of 120ms upon de-energisation and a power-on delay of 100ms. Designed for DIN rail mounting, it has a rated current of 8 A and falls under the RE22 sub-range. The housing offers an IP40 degree of protection, with IP20 for terminals and IP50 for the front face, made from self-extinguishing material. Power consumption at 240Vdc is 1.5 W, and it features SPDT (Single Pole Double Throw) - 1C/O contacts, with a rated impulse voltage of 5 kV. The supply voltage ranges from 24-240 V AC/DC, with a minimum of 20.4 V. Display indicators include a green LED backlight for dial pointer, yellow LEDs for output relay status and timing progress. It supports electrical durability of 100,000 operations at 250vac/24Vdc and up to 10,000,000 operations, with a time delay range of 1s to 300h. Operating temperature ranges from -20°C to +60°C.

Schneider Electric

RE22R2MMU Part Image. Manufactured by Schneider Electric.

RE22R2MMU

Verified stock: 0

Schneider Electric RE22R2MMU is an analog, modular multi-function timer designed for DIN rail mounting. It features a variety of functions including A, Ac, At, B, Bw, C, D, Di, H, and Ht, which are controlled via a front panel rotary knob. The timer offers a control signal pulse width of 100ms under load and 30ms, with a recovery time of 120ms on de-energisation and a power-on delay of 100ms. It has a rated current of 8 A and falls under the RE22 sub-range. The degree of protection is IP40 for both the front face and housing, with the terminal block rated at IP20. The housing material is self-extinguishing, and the power consumption at 24Vdc is 0.7 W. It features DPDT (Double Pole Double Throw) - 2C/O contacts, with a rated impulse voltage (Uimp) of 5 kV. The supply voltage ranges from 24-240 V AC and 24 V DC, with a minimum of 20.4 V. Display indicators include a green LED for timing in progress and power ON, and a yellow LED for relay energisation. Its electrical durability is rated at 100,000 operations for 250Vac resistive load and 10,000,000 operations. The time delay range is 0.1s to 100h or 0.1 to 360,000 seconds. It operates within a temperature range of -20°C to +60°C.

Schneider Electric

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo