PS025V-504-2UPN8X-H1141 Turck Industrial Automation Components

Turck PS025V-504-2UPN8X-H1141 is a sensor designed for pressure measurement with programmable instrumentation capabilities. It features a set point range of 1-100% and a reset point range of 0.5-99.5%, with measurement units including bar, psi, kPa, MPa, and miscellaneous options. The sensor operates within an ambient air temperature range of -40°C to +80°C and has a rotatable housing design with a diameter of 34mm. It is equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded male process port for connection. Part of the PS500 series, it offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's body is cylindrical, and it can reach a maximum switching frequency of 180Hz. Constructed from 1.4305 (303) stainless steel for both the housing and wetted parts, it also includes a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. It measures pressure ranges from -1 to +25bar (-14.5 to +362.5psi) and supports the IO-Link communication protocol. The fluid medium temperature range is -40°C to +85°C, with operating modes that are programmable as NO (Normally Open) or NC (Normally Closed). It features protection against short-circuit (pulsed) and reverse polarity, with a response time between 50 - 600ms. The sensor provides 1 x analog output (4-20mA; can also be used as a NPN/PNP digital output), boasting a set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, repeatability of ≤0.5% of the measuring range, and a zero shift/span shift of ≤0.15% of the measuring range per °C. Its current consumption is 50mA, with time delays for ON-delay and OFF-delay settings ranging from 0-50.