2116-1204 WAGO Industrial Automation Components

Wago 2116-1204 is a neutral-through terminal block designed for efficient connectivity with push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 76A (IEC), 90A (IEC), 85A (UL), 78A (CSA), 76A (Ex e II), and 65A (Ex e II with jumper). This terminal block is a 1-deck/level design featuring a lever, side and center marking slot, and a test port, making it suitable for Ex e II / Ex I applications. It has a net height of 8 kV for the rated impulse voltage (Uimp) and a net width accommodating a neutral-through pole (N). Designed for mounting on DIN-35 rail (35 x 15 / 35 x 7.5), it comes in blue with an orange actuator. The dimensions are H91.5mm x W12mm x D36.9mm, supporting a wide range of conductor sizes from 0.5mm2 to 25mm2 for fine stranded conductors and 0.5mm2 to 16mm2 for solid conductors, including #20AWG to #4AWG for fine stranded conductors and #20AWG to #6AWG for solid conductors. The terminal block has a 16mm2 nominal cross-section for the main feed-through conductor. Made from Polyamide (PA) 66, it features 2-wires (1 push-in + 1 push-in) for normally closed (NC) auxiliary contacts. The terminal operates at a voltage rating of 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.