235-402 WAGO Industrial Automation Components

WAGO 235-402 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal voltages of 250V (III/3), 320V (III/2), and 630V (II/2), with rated impulse voltages of 4kV for all categories. The rated current is 24A according to IEC/EN standards. Under UL 1059 approvals, it has rated voltages of 300V and rated currents of 10A for both Use Groups B and D, while CSA ratings for Use Group B are 300V and 15A. The connector has 2 connection points, supports 2 potentials, and offers a single connection type across one level. The PUSH WIRE connection technology requires an operating tool, accommodating solid conductors from 0.5 to 2.5mm2 (20 to 14 AWG), and fine-stranded conductors from 0.25 to 1.5mm2, with a strip length of 9 to 10mm. The pole number is 2, with a pin spacing of 5/5.08mm, and dimensions of 11.5mm in width, 12.8mm in height, 9.2mm height from the surface, and 12.5mm in depth. The solder pin length is 3.6mm, with dimensions of 0.8 x 0.4mm, and a drilled hole diameter of 1 (+0.1)mm. It features a THT PCB contact, in-line solder pin arrangement, and 2 solder pins per potential. The connector is gray, made from Polyamide (PA66) with a V0 flammability class, and uses Chrome-Nickel spring steel and Electrolytic Copper with tin plating for the clamping spring and contact materials, respectively. It weighs 1.5g, has a fire load of 0.026MJ, and operates within a temperature range of -60 to +105°C. Packaged in boxes of 420 pieces, it is RoHS compliant without exemptions, has a GTIN of 4044918653923, and a customs tariff number of 85369010000. The country of origin is CN.