770-1636 WAGO Electrical Connector Accessories

WAGO 770-1636 is a connector with a nominal voltage of 250V as per IEC/EN 60664-1, a rated impulse voltage of 4kV, and a rated current of 25A. It falls under the overvoltage category III and pollution degree 3. For the US market, it can also be used for current interruption in specific applications below 16A and up to 600V according to UL 1977, with a rated voltage of 600V and a rated current of 23A under UL 1977. The connector has approximately 1mΩ of contact resistance and 0.25mΩ contact transition plug/socket. It features two total potentials, with a 2-pole connection 1, and a pin spacing of 10mm. The dimensions are 20mm in width, 32.7mm in height, and 50.8mm in depth. Designed for general mains applications, it has a coding of A, marked L N for potential, and supports approximately 20 to 70N mating force, with a retention force when locked greater than 80N, and an unmating force of approximately 20 to 70N. It can endure 200 mating cycles without resistive load and is IP20 rated, moving to IP2xC when mated. The connector is suitable for flying leads, features a socket/plug contact type with mismating protection, and includes a locking lever for secure connection. It is made from black Polyamide (PA66) with a V0 flammability class, copper or copper alloy contacts with tin plating, and weighs 15.5g. It operates within a -5 to +40°C processing temperature range and a -35 to +85°C continuous operating temperature. The product belongs to the Winsta group 20, with an eClass 10.0 and 9.0 classification of 27-44-06-03, ETIM 8.0 and 7.0 classification of EC002567, packaged in boxes of 50 pieces, manufactured in Germany with a GTIN of 4050821531340, and a customs tariff number of 85366990990. It is RoHS compliant without exemptions.