X20AI4622 B&R Electronic Components

Product Details

• Temperature Operation Vertical mounting orientation
  -25 to 50°C
• Temperature Operation Horizontal mounting orientation
  -25 to 60°C
• Max. error Voltage Gain
  0.08%
• Max. error Current Offset
  0 to 20 mA = 0.03% / 4 to 20 mA = 0.16%
• Max. error Current Gain
  0 to 20 mA = 0.08% / 4 to 20 mA = 0.1%
• Relative humidity Storage
  5 to 95%, non-condensing
• Max. error Voltage Offset
  0.015%
• Relative humidity Transport
  5 to 95%, non-condensing
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Transport
  -40 to 85°C
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Mounting orientation Vertical
  Yes
• Temperature Derating
  -
• Temperature Storage
  -40 to 85°C
• Max. offset drift Current
  0 to 20 mA = 0.004 %/°C ; 4 to 20 mA = 0.005 %/°C
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Mounting orientation Horizontal
  Yes
• Nonlinearity Current
  <0.05%
• Common-mode rejection 50 Hz
  70 dB
• Common-mode rejection DC
  70 dB
Nonlinearity Voltage
<0.025%
Max. gain drift Current
0 to 20 mA = 0.009 %/°C ; 4 to 20 mA = 0.0113 %/°C
Permissible input signal Current
Max. ±50 mA
Max. offset drift Voltage
0.002%/°C
Status indicators
I/O function per channel, operating state, module status
Permissible input signal Voltage
Max. ±30 V
Max. gain drift Voltage
0.006%/°C
Load Current
<400 Ω
Input impedance in signal range Voltage
20 MΩ
Input impedance in signal range Current
-
Output format Current
INT 0x0000 - 0x7FFF / 1 LSB = 0x0008 = 4.883 µA
Load Voltage
-
Output of digital value during overload
Configurable
Output format Voltage
INT 0x8001 - 0x7FFF / 1 LSB = 0x0008 = 2.441 mV
Input protection
Protection against wiring with supply voltage
Digital converter resolution Current
12-bit
Input type
Differential input
I/O module
4 analog inputs ±10 V or 0 to 20 mA / 4 to 20 mA
Conversion time
400 μs for all inputs
Output format
INT
Input
±10 V or 0 to 20 mA / 4 to 20 mA, via different terminal connections
Digital converter resolution Voltage
±12-bit
Certifications KC
Yes
Certifications EAC
Yes
Certifications ABS
Yes
Certifications UL
cULus E115267; Industrial control equipment
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications KR
Yes
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Certifications LR
ENV1
Certifications UKCA
Yes
Certifications CE
Yes
Power consumption Internal I/O
1.1 W
Power consumption Bus
0.01 W
Diagnostics Inputs
Yes, using LED status indicator and software
Diagnostics Channel type
Yes, using software
Diagnostics Module run/error
Yes, using LED status indicator and software
Pitch
12.5+0.2 mm
Note
Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
B&R ID code
0x1BAA
Degree of protection per EN 60529
IP20
Electrical isolation
Channel isolated from bus; Channel not isolated from channel
Insulation voltage between channel and bus
500 Veff
Common-mode range
±12 V
Crosstalk between channels
<-70 dB
Conversion procedure
SAR
Input filter
Third-order low-pass filter / Cutoff frequency 1 kHz

Related documents X20AI4622 Specs