X20AT2222 B&R Electronic Components

Product Details

• Temperature Operation Vertical mounting orientation
  -25 to 50°C
• Temperature Operation Horizontal mounting orientation
  -25 to 60°C
• Relative humidity Storage
  5 to 95%, non-condensing
• Relative humidity Transport
  5 to 95%, non-condensing
• Relative humidity Operation
  5 to 95%, non-condensing
• Temperature Transport
  -40 to 85°C
• Temperature Storage
  -40 to 85°C
• Temperature Derating
  -
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Mounting orientation Horizontal
  Yes
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Mounting orientation Vertical
  Yes
• Resistance measurement monitoring Open inputs
  0xFFFF
• Resistance measurement monitoring Range overshoot
  0xFFFF
• Resistance measurement monitoring General fault
  0xFFFF
• Resistance measurement monitoring Open circuit
  0xFFFF
• Temperature measurement monitoring Open inputs
  0x7FFF
• Temperature measurement monitoring Open circuit
  0x7FFF
• Temperature measurement monitoring General fault
  0x8000
• Temperature measurement monitoring Range overshoot
  0x7FFF
Temperature sensor normalization Pt1000
-200.0 to 850.0°C
Temperature measurement monitoring Range undershoot
0x8001
Temperature sensor normalization Pt100
-200.0 to 850.0°C
Standardized range of values for resistance measurement G = 2
0.05 to 2250 Ω
Standardized range of values for resistance measurement G = 1
0.1 to 4500 Ω
Resistance measurement resolution G = 1
0.1 Ω
Common-mode rejection 50 Hz
>80 dB
Common-mode rejection DC
>95 dB
Resistance measurement resolution G = 2
0.05 Ω
Max. error at 25°C Gain
0.037%
Temperature sensor resolution Pt1000
1 LSB = 0.1°C
Max. error at 25°C Offset
0.0015%
Sensor Pt1000
-200 to 850°C
Sensor Sensor type
Configurable per channel
Sensor Pt100
-200 to 850°C
Conversion time 1 channel
20 ms with 50 Hz filter
Conversion time 2 channels
80 ms with 50 Hz filter
Certifications KC
Yes
Temperature sensor resolution Pt100
1 LSB = 0.1°C
Certifications ABS
Yes
Certifications EAC
Yes
Certifications KR
Yes
Certifications LR
ENV1
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications UL
cULus E115267; Industrial control equipment
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Certifications CE
Yes
Certifications UKCA
Yes
Power consumption Internal I/O
1.1 W
Diagnostics Module run/error
Yes, using LED status indicator and software
Power consumption Bus
0.01 W
Note
Order 1x terminal block X20TB06 or X20TB12 separately.; Order 1x bus module X20BM11 separately.
Pitch
12.5+0.2 mm
Degree of protection per EN 60529
IP20
Electrical isolation
Channel isolated from bus; Channel not isolated from channel
Diagnostics Inputs
Yes, using LED status indicator and software
Crosstalk between channels
<-93 dB
Max. gain drift
0.004%/°C
Nonlinearity
<0.001%
Permissible input signal
Short-term max. ±30 V
Max. offset drift
0.00015%/°C
Reference
4530 Ω ±0.1%
Measurement current
250 µA ±1.25%
Input filter
First-order low-pass filter / cutoff frequency 500 Hz
Linearization method
Internal
Common-mode range
>0.7 V
Insulation voltage between channel and bus
500 Veff
Sensor standard
EN 60751
Output format
INT or UINT for resistance measurement
Resistance measurement range
0.1 to 4500 Ω / 0.05 to 2250 Ω
Conversion procedure
Sigma-delta
Filter time
Configurable between 1 ms and 66.7 ms
Digital converter resolution
16-bit
Input
Resistance measurement with constant current supply for 2- or 3-wire connections
B&R ID code
0x1BA6
Status indicators
I/O function per channel, operating state, module status
I/O module
2 inputs for Pt100 or Pt1000 resistance temperature measurement

Related documents X20AT2222 Specs