X67AM1223 B&R Electronic Components

Product Details

• Weight195 g
• Torque for connections M12
  Max. 0.6 Nm
• Dimensions Depth
  42 mm
• Torque for connections M8
  Max. 0.4 Nm
• Dimensions Width
  53 mm
• Temperature Derating
  -
• Dimensions Height
  85 mm
• Temperature Storage
  -40 to 85°C
• Temperature Transport
  -40 to 85°C
• Temperature Operation
  -25 to 60°C
• Installation elevation above sea level 0 to 2000 m
  No limitation
• Max. error at 25°C and 10 kΩ load Gain
  0.15%
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Mounting orientation Any
  Yes
• Input filter Slope
  40 dB
• Max. error at 25°C and 10 kΩ load Offset
  0.05%
• Input filter Cutoff frequency
  300 Hz
• Short-circuit proof To GND
  Yes
• Short-circuit proof To sensor or I/O power supply
  Yes
• Common-mode rejection 50 Hz
  >50 dB
Common-mode rejection DC
>50 dB
Short-circuit proof Current limiting
±40 mA
Max. error Gain
0.1%
Output of digital value during overload Overshoot
0x7FFF
Power consumption Sensor/Actuator power supply
Max. 12 W
Output of digital value during overload Undershoot
0x8001
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Max. error Offset
0.05%
Certifications EAC
Yes
Output format Voltage
INT 0x8001 - 0x7FFF / 1 LSB = 0x0010 = 4.882 mV
Certifications UKCA
Yes
Certifications KC
Yes
Certifications ATEX
Zone 2, II 3G Ex nA IIA T5 Gc; IP67, Ta = 0 - Max. 60°C; TÜV 05 ATEX 7201X
Certifications UL
cULus E115267; Industrial control equipment
Power consumption X2X Link power supply
0.75 W
Certifications CE
Yes
Connection type Inputs/Outputs
4x M12, A-coded
Diagnostics Inputs
Yes, using LED status indicator and software
Connection type I/O power supply
M8, 4-pin
Power consumption Internal I/O
3 W
Connection type X2X Link
M12, B-coded
Diagnostics I/O power supply
Yes, using LED status indicator and software
Electrical isolation
Channel isolated from bus; Channel not isolated from channel
Degree of protection per EN 60529
IP67
Error caused by load change
Max. 0.01%, from 10 MΩ → 1 kΩ, resistive
Switch on/off behavior
Internal enable relay for startup and errors
Output response when the power supply is switched on/off
An enable relay is switched on at a defined value ≠ 0, default setting = 10 kΩ to GND
Load per channel
Max. ±10 mA, load ≥ 1 kΩ
Output filter
First-order low-pass filter / cutoff frequency 2.5 kHz
Output protection
Protection against wiring with supply voltage, short-circuit proof
Settling time on output change over entire range
Approx. 1 ms
Common-mode range
±11 V
Crosstalk between channels
<-70 dB
Output
±10 V
Nonlinearity
<0.1%
Max. offset drift
0.009%/°C
Insulation voltage between channel and bus
500 Veff
Max. gain drift
0.011%/°C
Input protection
Protection against wiring with supply voltage
Permissible input signal
Max. ±30 V
Conversion procedure
Successive approximation
Input impedance in signal range
20 MΩ
Conversion time
400 µs for both inputs
Output format
INT
Digital converter resolution
12-bit
Input type
Differential input
Input
±10 V
Integrated protection
Reverse polarity protection
Short-circuit proof
Yes
B&R ID code
0x1465
I/O module
2 analog inputs, 2 analog outputs, each ±10 V
Nominal voltage
24 VDC
Status indicators
I/O function per channel, supply voltage, bus function
Voltage
I/O power supply minus voltage drop for short-circuit protection
Voltage range
18 to 30 VDC
Voltage drop for short-circuit protection at 0.5 A
Max. 2 VDC
Summation current
Max. 0.5 A

Related documents X67AM1223 Specs