Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

3929314 Festo Positioners

Festo 3929314 positioner CMSX-P-S-C-U-F1-D-130-C electropneumatic, for double-acting pneumatic quarter turn actuators, standard nominal flow rate 130 l/min, holding regulating action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V, positi
Festo

Part#:3929314

Manufacturer:Festo

Alt. Part#:CMSX-P-S-C-U-F1-D-130-C

Product Lifecycle:Active

Get a quick Quote!

positioner CMSX-P-S-C-U-F1-D-130-C electropneumatic, for double-acting pneumatic quarter turn actuators, standard nominal flow rate 130 l/min, holding regulating action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V, positi

About the manufacturer: Festo is one of the manufacturers that offers Positioners that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 3929314 Festo price in the box on the right side or send a quick quote.

Product Details

  • Contamination level
    3
  • Display
    7-segment With backlighting
  • Analog inputs, overload protection
    yes
  • Approved cable diameter
    7-13 mm for electrical connection 1
  • Relative air humidity
    93 %
  • Analog outputs, resolution
    12 bit
  • Digital inputs, electrical isolation
    Yes, optocoupler
  • Material of screws
    High-alloy stainless steel
  • Analog inputs, resolution
    16 bit
  • Digital outputs, output current
    100 mA
  • Vibration resistance
    Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 as per EN 60068-2-6
  • Electrical connection 1, connection type
    Terminal strip
  • Digital outputs, potential separation
    Yes, optocoupler
  • Analog outputs, short-circuit protection
    yes
  • Electrical connection 1, function
    2x digital input Load power supply
  • Base plate material
    Wrought aluminum alloy Anodized
  • Analog outputs, max. load resistance
    ≤ 600 Ohm
  • Electrical connection 1, conductor cross section
    < 1.5 mm²
  • DC operating voltage range
    21.6 V ... 26.4 V
  • Information on operating and pilot media
    Operation with oil lubrication not possible
  • Product weight
    970 g
  • Seals material
    NBR
  • Switching input
    PNP NPN
  • Mode of operation
    Double-acting
  • Analog inputs, signal range
    0 - 10 V 4 - 20 mA
  • Max. cable length
    30 m for electrical connection 1
  • Digital outputs, reverse polarity protection
    yes
  • Digital inputs, reverse polarity protection
    yes
  • Input characteristics
    As per IEC 61131-2, type 3
  • Max. current consumption
    600 mA
  • Type code
    CMSX
  • Size of dead space
    0.5 % ... 10 %
  • Degree of protection
    IP65
  • Housing material
    PC-reinforced
  • Storage temperature
    -20 °C ... 60 °C
  • Shaft material
    High-alloy stainless steel
  • Analog inputs, galvanic isolation
    no
  • Quick-coupling material
    High-alloy stainless steel
  • Analog outputs, galvanic isolation
    no
  • Mounting position
    Any
  • Analog outputs, reverse polarity protection
    yes
  • Analog outputs, overload protection
    yes
  • Dimensions W x L x H
    190 mm x 105 mm x 130 mm
  • Analog outputs, signal range
    4 - 20 mA
  • Design features
    Safety position - pneumatic outlets closed
  • Nominal operating voltage DC
    24 V
  • Measuring principle of linear potentiometer
    Potentiometer
  • Certification
    RCM compliance mark
  • Ambient temperature
    -5 °C ... 60 °C
  • Standard nominal flow rate
    130 l/min
  • Material for cable connector
    PA
  • Blanking plug material
    PA
  • Switching output
    3 x PNP or 3 x NPN switchable
  • Inspection window material
    PC
  • Analog inputs, linearity error at 25°C
    0.5%
  • Design
    digital, electropneumatic positioner
  • Digital outputs, overload protection
    yes
  • Electrical connection 1, tightening torque
    0.6 Nm
  • Reverse polarity protection
    for operating voltage connections
  • Setting options
    Via display and pushbuttons
  • CE marking (see declaration of conformity)
    As per EU EMC directive As per EU RoHS directive
  • Type of mounting
    With accessories
  • Note on materials
    RoHS-compliant
  • Digital outputs, short circuit current rating
    yes
  • Electrical connection 1, connection technology
    Screw terminal
  • Analog outputs, linearity error at 25°C
    0.5%
  • Shock resistance
    Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 as per EN 60068-2-29
  • Analog outputs, temperature coefficient
    < 0.02 %FS/K
  • Analog inputs, temperature coefficient
    < 0.02 %FS/K
  • Electrical connection 1, number of pins/wires
    14
  • Operating pressure
    3 bar ... 8 bar
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Cable fitting
    M20 x 1.5 for electrical connection 1
  • Pneumatic connection
    G1/8

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents 3929314 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Festo

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Festo Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo