8036885 Festo Flow Sensors

Product Details

• Method of measurement
  Flow rate: vortex Temperature: PT1000
• Operating medium
  Liquid media Neutral liquids
• Switching element function
  N/C contact/N/O contact switchable
• Min. load resistance of voltage output
  15 kOhm
• IO-Link®, communication mode
  COM2 (38,4 kBd)
• IO-Link®, minimum cycle time
  5 ms
• Mounting position
  Any
• Symbol
  00995566
• Measured variable
  Flow rate Temperature
• Operating pressure
  0 bar ... 12 bar
• Ambient temperature
  0 °C ... 50 °C
• Repetition accuracy of flow rate value
  < ±0.5 % FS for flow rate <= 50 % FS < ±1 % o.m.v. for flow rate >= 50 %FS
• Switching function
  Window comparator Freely programmable
• Analog output
  0 - 10 V 1 - 5 V
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, process data content IN
  1 bit BDC (volume monitoring) 2 bit BDC (flow monitoring)
• Max. cable length
  20 m for IO-Link® operation 30 m
• Degree of protection
  IP65
• Certification
  RCM compliance mark c UL us - Listed (OL)
• Note on materials
  RoHS-compliant
Flow measuring range end value
100 l/min
Temperature of medium
0 °C ... 90 °C
Accuracy of temperature in ± °C
2 °C
Switching output
2 x PNP or 2 x NPN switchable
Flow characteristic curve, end value
100 l/min
Protocol
IO-Link®
IO-Link®, port class
A
IO-Link®, service data contents IN
32 bit volume measurement
IO-Link®, data memory required
500 byte
Fluid connector
DIN 32676 DN20 terminal connection
Materials in contact with the media
EPDM (peroxide) PA6T/6I-reinforced
Type code
SFAW
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Flow measuring range start value
5 l/min
Information on operating pressure
Max. 12 bar at 40°C Max. 6 bar at 100 °C
Nominal temperature
23 °C
Temperature co-efficient margin in ± %FS/K
Typ. ±0.05% FS/K
Max. output current
100 mA
Overload protection
Available
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data width OUT
0 Byte
DC operating voltage range
18 V ... 30 V
Reverse polarity protection
for all electrical connections
Displayable unit(s)
US gal °F
Corrosion resistance class (CRC)
3 - High corrosion stress
KC characters
KC EMC
Flow direction
Unidirectional P1 -> P2
Information on operating and pilot media
Media with a kinematic viscosity = 1.8 mm²/sec. [cSt]. Compatibility of the media with the substances that come into contact with the media must be ensured.
Accuracy of flow rate
±2 % FS for flow rate <= 50 % FS ±3 % o.m.v. for flow rate >= 50 %FS
Flow characteristic curve, start value
0 l/min
Max. load resistance of current output
500 Ohm
Short-circuit protection
yes
IO-Link®, profile
Smart sensor profile
IO-Link®, SIO mode support
Yes
IO-Link®, process data width IN
3 Byte
Electrical connection
5-pin Plug, straight
Product weight
280 g
Housing material
PA-reinforced

Related documents 8036885 Specs