8083570 Festo Electric Actuators
Part#:8083570
Manufacturer:Festo
Alt. Part#:ELGS-TB-KF-60-200-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
toothed belt axis unit ELGS-TB-KF-60-200-ST-M-H1-PLK-AA Effective diameter of drive pinion: 24,83 mm, Working stroke: 200 mm, Size: 60, Stroke reserve: 0 mm, Toothed-belt stretch: 0,124 %
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8083570 Festo price in the box on the right side or send a quick quote.
Product Details
- KC characters KC EMC
- Logic input specification Based on IEC 61131-2, type 1
- Permissible voltage fluctuations +/- 15 %
- Position sensing Motor encoder For proximity sensor
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Number of digital logic outputs 24 V DC 2
- DC nominal voltage 24 V
- Rotor position sensor resolution 16 bit
- IO-Link®, process data width IN 2 Byte
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Homing Fixed stop block positive Fixed stop block, negative
- Display LED
- Characteristics of logic input Configurable Not galvanically isolated
- Power supply, type of connection Plug
- Max. current of digital logic outputs 100 mA
- IO-Link®, minimum cycle time 1 ms
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, communication mode COM3 (230.4 kBd)
- Working stroke 200 mm
- Toothed belt elongation 0.124 %
- Type code ELGS
- Temperature monitoring Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
- Duty cycle 100%
- 2nd moment of area Iy 441000 mm⁴
- Max. torque Mx 29.1 Nm
- Feed constant 78 mm/U
- Slide weight 139 g
- Cover strip material Stainless steel strip
- Toothed belt material Polychloroprene with glass fiber
- Rotor position sensor Absolute encoder, single-turn
- Rotor position sensor measuring principle Magnetic
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Logic interface, connection type Plug
- Drive pinion effective diameter 24.83 mm
- Parameterization interface IO-Link® User interface
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Switching logic at outputs PNP (positive switching)
- Power supply, connection pattern 00995989
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Guide value for payload, horizontal 4 kg
- Nominal current 5.3 A
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, port class A
- Size 60
- Motor type Stepper motor
- Repetition accuracy ±0.1 mm
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Insulation protection class B
- Relative air humidity 0 - 90 %
- Input switching logic PNP (positive switching)
- Ready status indication LED
- Logic interface, connection pattern 00992264
- Number of digital logic inputs 2
- Work range of logic input 24 V
- Max. current consumption 5300 mA
- IO-Link®, SIO mode support Yes
- Protection class III
- Power supply, number of pins/wires 4
- Logic interface, number of poles/wires 8
- Storage temperature -20 °C ... 60 °C
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, protocol version Device V 1.1
- IO-Link®, Connection technology Plug
- Mounting position Horizontal
- Design Electromechanical linear axis With integrated drive
- Max. speed 1.04 m/s
- Ambient temperature 0 °C ... 50 °C
- Certification RCM compliance mark
- Max. feed force Fx 65 N
- Moving mass 482 g
- Material of end caps Die cast aluminum, painted
- Slide carriage material Tempered steel
- IO-Link®, number of ports 1
- IO-Link®, data memory required 500 byte
- Toothed belt pitch 3 mm
- Additional functions User interface Integrated end-position sensing
- Degree of protection IP40
- Max. force Fz 1800 N
- Max. torque Mz 31.8 Nm
- Profile material Wrought aluminum alloy, anodized
- Drive cover material Die cast aluminum, painted
- Slide material Die-cast aluminum
- Stroke reserve 0 mm
- Guide Recirculating ball bearing guide
- Symbol 00997293
- Max. acceleration 6 m/s²
- 2nd moment of area Iz 542000 mm⁴
- Max. torque My 31.8 Nm
- Moving mass at 0 mm stroke 482 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Guide rail material Tempered steel
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Max. force Fy 600 N
- Torsion moment of inertia It 29800 mm⁴
- Product weight 3815 g
- Belt pulley material High-alloy stainless steel
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8083570 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨