Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

8083718 Festo Electric Actuators

Festo 8083718 mini slide unit EGSS-BS-KF-60-100-12P-ST-M-H1-PLK-AA Working stroke: 100 mm, Size: 60, Stroke reserve: 0 mm, Reversing backlash: 150 µm, Spindle diameter: 12 mm
Festo

Part#:8083718

Manufacturer:Festo

Alt. Part#:EGSS-BS-KF-60-100-12P-ST-M-H1-PLK-AA

Product Lifecycle:Active

Get a quick Quote!

mini slide unit EGSS-BS-KF-60-100-12P-ST-M-H1-PLK-AA Working stroke: 100 mm, Size: 60, Stroke reserve: 0 mm, Reversing backlash: 150 µm, Spindle diameter: 12 mm

About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8083718 Festo price in the box on the right side or send a quick quote.

Product Details

  • Characteristics of digital logic outputs
    Configurable Not galvanically isolated
  • Ready status indication
    LED
  • KC characters
    KC EMC
  • Relative air humidity
    0 - 90 %
  • Parameterization interface
    IO-Link® User interface
  • Power supply, type of connection
    Plug
  • Logic interface, number of poles/wires
    8
  • Rotor position sensor resolution
    16 bit
  • IO-Link®, process data width IN
    2 Byte
  • Additional functions
    User interface Integrated end-position sensing
  • Rotor position sensor
    Absolute encoder, single-turn
  • Max. cable length
    15 m outputs 20 m for IO-Link® operation
  • Logic interface, connection pattern
    00992264
  • Power supply, connection technology
    M12x1, T-coded as per EN 61076-2-111
  • Number of digital logic outputs 24 V DC
    2
  • Nominal current
    5.3 A
  • IO-Link®, Connection technology
    Plug
  • IO-Link®, service data contents IN
    32 bit force 32 bit speed
  • IO-Link®, process data width OUT
    2 Byte
  • Stroke reserve
    0 mm
  • Motor type
    Stepper motor
  • Spindle type
    Ball screw drive
  • Max. speed
    0.24 m/s
  • Corrosion resistance class (CRC)
    0 - No corrosion stress
  • Fixed bearing dynamic basic load rating
    13321 N
  • Max. force Fz
    4937 N
  • Guide value for payload, horizontal
    10 kg
  • Feed constant
    12 mm/U
  • Switching logic at outputs
    PNP (positive switching)
  • Vibration resistance
    Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
  • Logic input specification
    Based on IEC 61131-2, type 1
  • Display
    LED
  • Permissible voltage fluctuations
    +/- 15 %
  • Number of digital logic inputs
    2
  • Max. current consumption
    5300 mA
  • IO-Link®, number of ports
    1
  • IO-Link®, process data content IN
    1 bit (state device) 1 bit (state out)
  • Screw diameter
    12 mm
  • Shock resistance
    Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
  • Insulation protection class
    B
  • Characteristics of logic input
    Configurable Not galvanically isolated
  • Input switching logic
    PNP (positive switching)
  • Logic interface, connection type
    Plug
  • Power supply, connection pattern
    00995989
  • DC nominal voltage
    24 V
  • Storage temperature
    -20 °C ... 60 °C
  • Max. current of digital logic outputs
    100 mA
  • IO-Link®, port class
    A
  • IO-Link®, protocol version
    Device V 1.1
  • IO-Link®, process data content OUT
    1 bit (move in) 1 bit (quit error)
  • Protection class
    III
  • Size
    60
  • Spindle pitch
    12 mm/U
  • Mounting position
    Any
  • Position sensing
    Motor encoder For proximity sensor
  • Duty cycle
    100%
  • Linear guide dynamic basic load rating
    13400 N
  • Max. feed force Fx
    250 N
  • Linear guide statistical basic load rating
    26900 N
  • Additional weight per 10 mm stroke
    95 g
  • Note on ambient temperature
    Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
  • Rotor position sensor measuring principle
    Magnetic
  • Logic interface, connection technology
    M12x1, A-coded as per EN 61076-2-101
  • Power supply, number of pins/wires
    4
  • Work range of logic input
    24 V
  • IO-Link®, communication mode
    COM3 (230.4 kBd)
  • IO-Link®, minimum cycle time
    1 ms
  • IO-Link®, data memory required
    500 byte
  • IO-Link®, SIO mode support
    Yes
  • Working stroke
    100 mm
  • Guide
    Recirculating ball bearing guide
  • Symbol
    00997294
  • CE marking (see declaration of conformity)
    As per EU EMC directive As per EU RoHS directive
  • Certification
    RCM compliance mark
  • Max. force Fy
    4937 N
  • Max. radial force on actuator shaft
    420 N
  • Guide value for payload, vertical
    10 kg
  • Basic weight with 0 mm stroke
    2735 g
  • Reversing backlash
    150 µm
  • Type code
    EGSS
  • Design
    Electrical mini-slide With integrated drive
  • Repetition accuracy
    ±0.015 mm
  • Dynamic basic load rating, ball screw drive
    4600 N
  • Max. torque My
    30 Nm
  • Ball screw drive statistical basic load rating
    8500 N
  • Reference value, running performance
    5000 km
  • Additional moving mass per 10 mm stroke
    40 g
  • Homing
    Fixed stop block positive Reference switch
  • Max. acceleration
    5 m/s²
  • Degree of protection
    IP40
  • Ambient temperature
    0 °C ... 50 °C
  • Max. torque Mx
    20 Nm
  • Max. torque Mz
    30 Nm
  • Statistical fixed bearing load rating
    7000 N
  • Moving mass at 0 mm stroke
    675 g
  • Material of yoke plate
    Wrought aluminum alloy, anodized
  • Maintenance interval
    Life-time lubrication
  • Product weight
    3685 g
  • Slide carriage material
    Roller bearing steel
  • Spindle nut material
    Roller bearing steel
  • Type of mounting
    With internal thread With cylindrical pin
  • Piston rod material
    High-alloy stainless steel
  • Slide material
    Wrought aluminum alloy, anodized
  • Note on materials
    Contains paint-wetting impairment substances RoHS-compliant
  • Spindle material
    Roller bearing steel
  • Guide rail material
    Roller bearing steel
  • Housing material
    Wrought aluminum alloy, anodized

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents 8083718 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Festo

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Festo Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo