0719087 Phoenix Contact Terminal Blocks

Product Details

• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Connection in acc. with standard
  CSA
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• UNSPSC 12.01
  39121410
• Height NS 32
  47 mm
• Conductor cross section flexible min.
  0.2 mm²
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Conductor cross section solid max.
  4 mm²
• Height NS 35/7,5
  42 mm
• Tightening torque, min
  0.6 Nm
• Max. AWG conductor cross section, flexible
  14
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Color
  green
• Degree of pollution
  3
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Screw thread
  M3
• Conductor cross section short circuit testing
  4 mm²
• Relative insulation material temperature index (Elec., UL 746 B)
  125 °C
• Connection method
  Screw connection
Tightening torque max
0.8 Nm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
Potentials
1
Flammability rating according to UL 94
V2
Maximum power dissipation for nominal condition
0.77 W
Nominal current IN
24 A
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Setpoint
1 N
Short circuit stability result
Test passed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Number of connections
2
Insulating material group
I
Open side panel
Yes
Back of the hand protection
guaranteed
Result of tight fit on support
Test passed
Tensile test result
Test passed
Short-time current
0.48 kA
Width
5.2 mm
End cover width
1.5 mm
Insulating material
PA
Number of levels
1
Nominal voltage UN
800 V
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
2 conductors with same cross section, stranded max.
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 5.0
27141100
ECLASS 11.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 4.1
27141100
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Cross section with insertion bridge, solid max.
2.5 mm²
2 conductors with same cross section, solid max.
1 mm²
ECLASS 4.0
27141100
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Overvoltage category
III
Maximum load current
24 A (with a 2.5 mm² conductor cross section)
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Bending test turns
135
Tight fit on carrier
NS 32/NS 35
Result of voltage-drop test
Test passed
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Stripping length
7 mm
Result of thermal test
Test passed
Length
42.5 mm
Height NS 35/15
49.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²