0719113 Phoenix Contact Terminal Blocks

Product Details

• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• UNSPSC 21.0
  39121410
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• UNSPSC 7.0901
  39121410
• ETIM 4.0
  EC000897
• UNSPSC 11
  39121410
• UNSPSC 18.0
  39121410
• Power frequency withstand voltage setpoint
  2 kV
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  0.77 W
• Finger protection
  guaranteed
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Tensile test result
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Conductor cross section short circuit testing
  4 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Nominal cross section
2.5 mm²
Maximum load current
32 A (with 4 mm² conductor cross section)
Open side panel
Yes
Surface flammability NFPA 130 (ASTM E 162)
passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
42.5 mm
Potentials
1
Insulating material
PA
Overvoltage category
III
Shock protection test specification
IEC 60529:2001-02
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of thermal test
Test passed
Number of connections
2
Rated surge voltage
8 kV
Nominal voltage UN
800 V
Nominal current IN
24 A
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Setpoint
1 N
Short-time current
0.48 kA
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Number of levels
1
Color
orange
Insulating material group
I
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of voltage-drop test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
5.2 mm
Height NS 32
52 mm
Connection method
Screw connection
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ECLASS 6.0
27141100
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
UNSPSC 6.01
30211811
ETIM 6.0
EC000897
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Static insulating material application in cold
-60 °C
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Height NS 35/7,5
47 mm
Connection in acc. with standard
CUL
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ECLASS 7.0
27141120
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
54.5 mm
Tightening torque max
0.8 Nm
Stripping length
8 mm
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
24
ECLASS 4.1
27141100
ETIM 2.0
EC000897
ECLASS 9.0
27141120
Tightening torque, min
0.6 Nm
Screw thread
M3
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
14
ECLASS 11.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410