1015520 Phoenix Contact Electrical Safety Devices
Part#:1015520
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 1
Dec 23, 2024
Safety relay module for safety shut-off mats, switching strips, emergency stop, safety doors, and light grids up to SILCL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual start, 2 safe HL outputs, 1 signal output, US = 24 V DC, plug-in screw
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1015520 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Height 112.2 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Depth 114.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current max. 4.8 A (Δt = 10 ms)
- Filter time max. 1.5 ms (Test pulse width of low test pulses)
- Max. permissible overall conductor resistance 150 Ω
- Cable length 100 m
- Output description PNP
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Power consumption at US typ. 1.3 W
- Input name External release
- Input current range "0" signal 0 mA ... 2 mA (S10, S12)
- Output voltage ≥ 23 V DC (Us - 1 V)
- Max. capacitive load max. 10 µF (2.4 A load)
- Current max. 100 mA
- Maximum inrush current 500 mA (Δt = 1 ms at Us)
- Restart time < 250 ms (Boot time)
- Net weight 108.657 g
- Min. degree of protection of inst. location IP54
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -40 °C ... 70 °C (observe derating)
- Designation Air clearances and creepage distances between the power circuits
- Rated control supply current IS typ. 54 mA (No load)
- Protective circuit Parallel protection against polarity reversal Suppressor diode Provide external protection, see safety notes. Fuse type: 5 A FF
- Protective circuit/component Suppressor diode
- Number of outputs 1
- Leakage current max. 1 mA (in the safe state)
- Test pulses < 120 µs (Test pulse width of low test pulses)
- Type of protection Freewheeling circuit for inductive loads
- Typical pickup time at US < 200 ms (with Us when controlled via A1)
- Mounting type DIN rail mounting
- Degree of protection IP20
- Housing material PBT
- Housing color yellow
- Conductor cross-section AWG 24 ... 12
- Performance level (PL) e
- Standards/regulations DIN EN 50178, EN 60947-5-1
- Vibration (operation) 10 Hz ... 150 Hz, 5g
- ECLASS 10.0.1 27371819
- ETIM 7.0 EC001449
- Width 12.5 mm
- Maximum altitude ≤ 2000 m (Above sea level)
- Description of the input safety-related
- Input voltage range "1" signal 11 V DC ... 30 V DC
- Current consumption 7 mA
- Output name 14, 24
- Output current max. 2.4 A
- Min. load current 2 mA
- Voltage approx. 22 V DC (Us - 2 V)
- Typical response time at US < 200 ms (automatic start)
- Nominal operating mode 100% operating factor
- Protection class II (EN 50178)
- pluggable Yes
- Torque 0.5 Nm ... 0.6 Nm
- Safety Integrity Level (SIL) 3
- Rated surge voltage/insulation Basic insulation 4 kV between all current paths and housing
- REACh SVHC Lead 7439-92-1
- Shock 30g
- Rated control circuit supply voltage US 24 V DC -20 % / +25 % (provide external protection)
- Input voltage range "0" signal 0 V DC ... 5 V DC
- Number of inputs 1
- Concurrence ∞
- Output voltage when switched off < 5 V DC (in the safe state)
- Switching frequency 1 Hz (Resistive, inductive, capacitive)
- Limitation of the voltage induced on circuit interruption max. 50 V
- Short-circuit protection Yes
- Assembly instructions See derating curve
- Status display 3 x green LED
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Stop category 0
- Safety Integrity Level Claim Limit (SIL CL) 3
- Overvoltage category III
- ECLASS 9.0 27371819
- Ohmic load min. 12 Ω
- Max. inductive load max. 1 H
- Response time < 10 ms (Take the extension of the response time into consideration if you switch several devices in sequence.)
- Recovery time 250 ms (following demand of the safety function)
- Mounting position vertical or horizontal
- Operating voltage display 1 x green LED
- Connection method Screw connection
- Screw thread M3
- Stripping length 7 mm
- Category 4
- China RoHS Environmentally Friendly Use Period = 50 years
- ETIM 6.0 EC001449
- Indication 1 x red LED
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Rated insulation voltage 50 V
- Degree of pollution 2
- Conformance CE-compliant
- ECLASS 11.0 27371819
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$257.31
Stock:
1
Select Qty:
$257.31
$257.31 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
