1015526 Phoenix Contact Electrical Safety Devices

Product Details

• Height
  117.5 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Rated control supply current IS
  typ. 80 mA
• Inrush current
  min. 3 mA
• Input name
  Start circuit
• Depth
  114.5 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Designation
  Air clearances and creepage distances between the power circuits
• Ambient temperature (operation)
  -35 °C ... 60 °C (observe derating)
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Filter time
  max. 3 ms (Test pulse width of low test pulses)
• Input voltage range "0" signal
  0 V DC ... 5 V DC
• Max. permissible overall conductor resistance
  150 Ω
• Limit frequency
  min. 0 Hz
• Number of outputs
  2
• Limiting continuous current
  6 A
• Switching voltage
  min. 12 V AC/DC
• Current
  max. 100 mA
• Typical pickup time at US
  500 ms (with Us when controlled via A1)
• Typical response time at US
  < 40 ms (automatic start)
Mounting type
DIN rail mounting
Housing color
yellow
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Standards/regulations
DIN EN 50178
Degree of pollution
2
ECLASS 11.0
27371819
Width
22.5 mm
Maximum altitude
≤ 2000 m (Above sea level)
Protective circuit
Serial protection against polarity reversal Suppressor diode
Input current range "0" signal
0 mA ... 2 mA
Concurrence
∞
Sq. Total current
108 A2 (observe derating)
Switching capacity according to IEC 60947-5-1
4 A (24 V (DC13))
Short-circuit protection
Yes
Delay time range
0.2 s ... 300 s ±5 % (can be set for 47/48/58)
Net weight
155.43 g
Min. degree of protection of inst. location
IP54
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Category
4
Overvoltage category
III
Conformance
CE-compliant
ETIM 6.0
EC001449
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Rated control circuit supply voltage US
24 V DC -20 % / +25 %
Power consumption at US
typ. 1.92 W
Number of inputs
1
Protective circuit/component
Suppressor diode
Contact material
AgSnO2
Switching capacity
min. 60 mW
Mechanical service life
10x 106 cycles
Voltage
corresponds to US
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Degree of protection
IP20
Housing material
PBT
pluggable
Yes
Safety Integrity Level (SIL)
3
Safety Integrity Level Claim Limit (SIL CL)
3
REACh SVHC
Lead 7439-92-1
Description of the input
non-safety-related
Input voltage range "1" signal
11 V DC ... 30 V DC
Output name
Enabling current paths
Output description
PNP
Output fuse
6 A gL/gG
Cable length
max. 150 m
Recovery time
500 ms (following demand of the safety function)
Restart time
< 1 s (Boot time)
Mounting position
vertical or horizontal
Connection method
Push-in connection
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Stop category
0
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths and housing
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 7.0
EC001449
Current consumption
< 3.2 mA (typically with US)
Contact type
5 enabling current paths
Switching frequency
0.5 Hz (depending on the set delay time)
Maximum inrush current
500 mA (Δt = 10 ms at Us)
Typical release time at US
< 25 ms (when controlled via S12 and S22 (only for undelayed contacts))
Nominal operating mode
100% operating factor
Assembly instructions
See derating curve
Status display
5 x bi-color LED
Conductor cross-section AWG
24 ... 16
Performance level (PL)
e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
Rated insulation voltage
250 V AC
Shock
10g (operation), 15g (transport)
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 10.0.1
27371819
ECLASS 9.0
27371819