1028067 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section tensile test
  4 mm²
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 11.0
  27141120
• ECLASS 9.0
  27141120
• ETIM 4.0
  EC000897
• UNSPSC 20.0
  39121410
• Number of levels
  1
• Insulating material
  PA
• Maximum load current
  27 A
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Note
  When aligning several blocks, the foot elements should be placed in a way that maximum 5 blocks are free-hanging in between. Flange elements should be placed after every 9 blocks.
• Short circuit stability result
  Test passed
• Oscillation, broadband noise test result
  Test passed
ASD level
6.12 (m/s2)2/Hz
Length
28.6 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Test spectrum
Service life test category 2, bogie-mounted
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Potentials
1
Rated surge voltage
6 kV
Insulating material group
I
Nominal voltage UN
450 V
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Result of thermal test
Test passed
Degree of pollution
3
Nominal current IN
24 A
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
ECLASS 10.0.1
27141120
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 13.2
39121410
Nominal cross section
2.5 mm²
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tractive force setpoint
60 N
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Result of aging test
Test passed
Shock test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Connection method
Push-in connection
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
UNSPSC 7.0901
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Color
gray
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
12
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141121
Setpoint
1 N
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Number of connections
2
Flammability rating according to UL 94
V0
Overvoltage category
III
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Conductor cross section AWG min.
26
Height
21.7 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section solid max.
4 mm²