1028369 Phoenix Contact Terminal Blocks

Product Details

• Result of surge voltage test
  Test passed
• Insulating material
  PA
• Open side panel
  No
• Nominal cross section
  4 mm²
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Result of tight fit on support
  Test passed
• Note
  When aligning several blocks, the foot elements should be placed in a way that maximum 2 blocks are free-hanging in between. Flange elements should be placed after every 6 blocks.
• Short circuit stability result
  Test passed
• Short-time current
  0.72 kA
• Result of aging test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Color
  pink
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Bending test rotation speed
10 rpm
Conductor cross section tensile test
6 mm²
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Acceleration
30g
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
28.6 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Nominal voltage UN
450 V
Tractive force setpoint
80 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Flammability rating according to UL 94
V0
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
5 N
Conductor cross section short circuit testing
6 mm²
Oscillation, broadband noise test result
Test passed
Connection method
Push-in connection
Number of connections
2
Result of power-frequency withstand voltage test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
21.7 mm
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Number of levels
1
Maximum load current
41 A
Nominal current IN
32 A
Finger protection
guaranteed
Bending test turns
135
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Connection cross sections directly pluggable
0.5 mm² 6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141121
ECLASS 5.1
27141120
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Stripping length
10 mm ... 12 mm
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
Conductor cross section AWG min.
24
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 11.0
27141120
ECLASS 4.1
27141121
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Min. AWG conductor cross section, flexible
24
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 19.0
39121410