1045923 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  1.5 mm²
• Flammability rating according to UL 94
  V0
• Open side panel
  No
• Width
  4.2 mm
• Number of levels
  1
• Color
  gray
• Insulating material group
  I
• Maximum load current
  21 A (with a 2.5 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Tight fit on carrier
  NS 35/NS 15
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Number of connections
  2
• Degree of pollution
  3
• Maximum total current
  21 A
• Nominal voltage UN
  450 V
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
17.7 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
1.5 mm²
Internal cylindrical gage
A1 / B1
Ambient temperature (assembly)
-5 °C ... 70 °C
Potentials
1
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.56 W
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Bending test turns
135
Setpoint
1 N
Test spectrum
Service life test category 2, bogie-mounted
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Insulating material
PA
Overvoltage category
III
Back of the hand protection
guaranteed
Nominal current IN
17.5 A
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Short-time current
0.3 kA
Shock test result
Test passed
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Connection in acc. with standard
IEC 60998-2-2
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
ETIM 2.0
EC000897
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Number of shocks per direction
3
Length
21.6 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Conductor cross section AWG min.
26
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ECLASS 9.0
27141120
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
ECLASS 4.1
27141120
ETIM 7.0
EC000897
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
ETIM 4.0
EC000897
Result of tight fit on support
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Stripping length
8 mm ... 10 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
UNSPSC 12.01
39121410
ECLASS 6.0
27141100
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²