1082479 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Degree of pollution
  3
• Maximum load current
  76 A (with a 16 mm² conductor cross section, rigid)
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Conductor cross section tensile test
  16 mm²
• Tight fit on carrier
  NS 35
• Result of aging test
  Test passed
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Surge voltage test setpoint
  9.8 kV
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• ASD level
  6.12 (m/s2)2/Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
34.2 mm
Height
25.1 mm
Conductor cross section flexible min.
0.5 mm²
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Insulating material
PA
Maximum total current
90 A (The maximum load current of the individual terminal point must not be exceeded.)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Result of tight fit on support
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
37 mm
Conductor cross section AWG min.
20
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Number of connections
6
Nominal cross section
10 mm²
Overvoltage category
III
Nominal voltage UN
800 V
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
24.5 mm
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Potentials
1
Rated surge voltage
8 kV
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
100 N
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock form
Half-sine
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
12 mm ... 14 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 9.0
27141120
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
10 mm²
Connection cross sections directly pluggable
1 mm² 16 mm²
ECLASS 10.0.1
27141120
Ambient temperature (assembly)
-5 °C ... 70 °C
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²