1082548 Phoenix Contact UPS (DC)

Product Details

• Degree of protection
  IP20
• Current consumption (charging process)
  < 0.8 A (Charging (ICharge = max, IOut = 0))
• Input fuse, integrated
  7 A (slow-blow, internal)
• Net weight
  0.52 kg
• MTBF (IEC 61709, SN 29500)
  > 1997000 h (40 °C)
• Conductor cross section flexible max.
  2.5 mm²
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG min.
  24
• Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
  EN 50178/VDE 0160 (PELV)
• Electromagnetic HF field
  EN 61000-4-3
• Discharge in air
  8 kV (Test Level 3)
• Conducted interference
  EN 61000-4-6
• Voltage
  10 V (Test Level 3)
• ETIM 7.0
  EC000382
• Height
  90 mm
• Ambient temperature (storage/transport)
  -20 °C ... 45 °C
• Input voltage range
  10 V DC ... 16.5 V DC
• Current consumption (maximum)
  6 A
• Nominal output current (IN)
  4 A (0 °C ... 40 °C)
• Efficiency
  > 97.4 % (Mains operation, with charged energy storage)
Connection method
Screw connection
Conductor cross section AWG max.
12
Quality check of battery
Yes, every time it is charged and cyclically once a month
UL approvals
UL Listed UL 508
Test field strength
10 V/m (Test Level 3)
Fast transients (burst)
EN 61000-4-4
Criterion A
Normal operating behavior within the specified limits.
ETIM 6.0
EC000382
Depth
71 mm
Ambient temperature (operation)
0 °C ... 40 °C
Degree of pollution
2
Fixed backup threshold
< 10 V
Output voltage range (depends on the input voltage)
10 V DC ... 15 V DC (UOut = UIn (t-1))
Mounting position
horizontal DIN rail NS 35, EN 60715
Stripping length
6.5 mm
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Electrostatic discharge
EN 61000-4-2
Frequency range
0.15 MHz ... 80 MHz
Surge voltage load (surge)
EN 61000-4-5
Input
1 kV (Test Level 2 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040705
Width
108 mm
Installation distance top/bottom
30 mm / 30 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Current consumption (idle)
< 30 mA
Variable connect threshold
1 V / 1 s
Protection class
III
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Conductor cross section solid max.
2.5 mm²
Screw thread
M3
Deep discharge protection
< 15 V DC
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Signal
1 kV (Test Level 2 - asymmetrical)
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27040705
Installation distance right/left
0 mm / 0 mm
Climatic class
3K3 (in acc. with EN 60721)
Input voltage
12 V DC
Nominal output voltage
12 V DC
IQ technology
no
Memory medium
Lithium-ion
Conductor cross section flexible min.
0.2 mm²
EMC requirements for noise immunity
EN 61000-6-2
Contact discharge
6 kV (Test Level 3)
Comments
Criterion A
Output
1 kV (Test Level 2 - symmetrical)
I/O/S
asymmetrical
ECLASS 9.0
27040705