1088732 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Insulating material
  PA
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Tractive force setpoint
  80 N
• Result of voltage-drop test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Test spectrum
  Service life test category 2, bogie-mounted
• Acceleration
  30g
• Shock test result
  Test passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Color
  blue
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Nominal current IN
  32 A
• Nominal voltage UN
  1000 V
• Surge voltage test setpoint
  9.8 kV
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Degree of pollution
3
Maximum power dissipation for nominal condition
1.02 W
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
54.7 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Nominal cross section
4 mm²
Rated surge voltage
8 kV
Maximum load current
36 A (with 6 mm² conductor cross section, rigid)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Conductor cross section tensile test
6 mm²
Short-time current
0.48 kA
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
6.2 mm
Height
45.7 mm
Connection
1 level
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Number of connections
3
Area of application
Railway industry
Open side panel
Yes
Power frequency withstand voltage setpoint
2.2 kV
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
47.2 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Internal cylindrical gage
A4
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
0.75 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Connection cross sections directly pluggable
0.75 mm² 6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
Length
60 mm
Stripping length
9 mm ... 11 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410