1088741 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Nominal current IN
  20 A
• Open side panel
  Yes
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tight fit on carrier
  NS 35
• Result of aging test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height NS 35/7,5
  36.8 mm
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• ECLASS 11.0
  27141126
• ECLASS 6.0
  27141100
• ETIM 4.0
  EC000902
UNSPSC 20.0
39121410
Nominal cross section
4 mm²
Area of application
Railway industry
Connection in acc. with standard
IEC 60947-7-1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Conductor cross section short circuit testing
0.5 mm²
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Stripping length
9 mm ... 11 mm
ECLASS 4.1
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Number of levels
1
Rated surge voltage
6 kV
Maximum load current
20 A (with a 2.5 mm² conductor cross section)
Result of surge voltage test
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
6.2 mm
Height NS 35/15
44.3 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Internal cylindrical gage
A4
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000902
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 6.01
30211811
Note
Current and voltage are determined by the plug used.
Insulating material
PA
Insulating material group
I
Nominal voltage UN
500 V (Current and voltage are determined by the plug used.)
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
36.9 mm
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
Connection method
Push-in connection
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 13.2
39121410
Color
gray
Degree of pollution
3
Maximum power dissipation for nominal condition
1.02 W
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short-time current
60 A
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
63.3 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 4.0
27141100
ECLASS 7.0
27141126
UNSPSC 19.0
39121410