1088872 Phoenix Contact Data & Networking Devices

Product Details

• Width
  128 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Air pressure (operation)
  79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
• Transmission length
  up to 80 km (Depending on the fiber/SFP module used)
• Configuration memory
  max. 8 GByte (SD card)
• Basic functions
  Store-and-forward switch, complies with IEEE 802.3
• Filter functions
  Quality of Service (8 priority classes)
• Cascading depth
  Network, linear, and star structure: any
• Interface
  Ethernet (combo)
• Degree of protection
  IP20
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Degree of pollution
  2
• No. of ports
  2 (Combo ports)
• Diagnostic functions
  RMON History
• Additional functions
  Jumbo frames (Max. 9,600 bytes)
• Time synchronization
  SNTP (Simple Network Time Protocol)
• Port security
  MAC-based, RADIUS (IEEE 802.1X)
• Mounting type
  DIN rail
• Supply voltage range
  19.2 V DC ... 32 V DC
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Immunity to surge
EN 61000-6-2 EN 61000-4-5 (surge) Criterion A
Noise emission
EN 61000-6-4
UL, Canada
CSA C22.2 NO. 61010-1-12, Ed. 3
UL, USA
UL 61010-1, Ed. 3
ECLASS 10.0.1
19170401
Depth
69 mm
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Transmission physics
Depending on the SFP module
Signal LEDs
Data receive, link status
IP parameterization
DHCP-Client
Redundancy
MRP (Media Redundancy Protocol)
Status and diagnostic indicators
LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link/Activity and Speed)
Supply voltage
24 V DC (redundant)
Net weight
650 g
Material base plate
Die-cast aluminum, corrosion-resistant
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Immunity to EF
EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
Type of test
Free fall in accordance with EN 61131-2
Noise immunity
EN 61000-6-2
China RoHS
Environmentally Friendly Use Period = 50 years
Height
110 mm
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Transmission speed
10/100/1000 Mbps (full duplex)
Connection method
Push-in spring connection
MAC address table
8k
PROFINET device function
PROFINET device
Signal contact control voltage
typ. 24 V DC
Type AX
Block design
Max. current consumption
390 mA (US = min, Tamb = max)
Conductor cross section solid max.
1.5 mm²
Stripping length
10 mm
Interference emission
EN 61000-6-2 EN 61000-6-4 (interference) Class A
Immunity to ESD
EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
Shock (operation)
30g (EN 60068-2-27)
REACh SVHC
Lead 7439-92-1
Air pressure (storage/transport)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
Note on the connection method
Auto negotiation and autocrossing
Number of interfaces
2
Management
Web-based management (HTTP/HTTPS)
PROFINET conformance class
Conformance-Class B
Residual ripple
3.6 VPP (within the permitted voltage range)
Maximum conductor length (twisted pair)
100 m
Note
Support by phone or on-site (fee is charged)
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
16
Conducted noise emission
EN 61000-6-2 EN 61000-6-4 (conducted interference) Class A
Vibration (storage/transport)
5g, 150 Hz, in acc. with IEC 60068-2-6
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
ECLASS 11.0
19170401
Typical current consumption
270 mA (at US = 24 V DC and 25 °C ambient temperature)
Housing material
Stainless steel 1.4301
MTTF
357.82 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Conductor cross section solid min.
0.2 mm²
Immunity to burst
EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
Immunity to conducted interference
EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
Free from substances that could impair the application of coating
Yes
Noxious gas test
ISA S71.04.2013 G3 Harsh Group A
ECLASS 9.0
19170106