1093658 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Degree of pollution
  3
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  2 kV
• Result of tight fit on support
  Test passed
• Conductor cross section short circuit testing
  35 mm²
• Result of thermal test
  Test passed
• Test duration per axis
  5 h
• Number of shocks per direction
  3
• Width
  15.2 mm
• Conductor cross section solid min.
  0.75 mm²
• Conductor cross section flexible max.
  35 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  35 mm²
• 2 conductors with same cross section, stranded min.
  0.75 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  6 mm²
• Screw thread
  M6
• ECLASS 4.0
  27141120
• ECLASS 6.0
  27141100
• ETIM 4.0
  EC000897
• UNSPSC 11
  39121410
UNSPSC 13.2
39121410
Number of levels
1
Insulating material
PA
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.75 mm² / 0.4 kg
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Length
55 mm
Conductor cross section solid max.
35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.75 mm²
Tightening torque, min
3.2 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ECLASS 7.0
27141125
ETIM 6.0
EC001329
UNSPSC 18.0
39121410
Flammability rating according to UL 94
V2
Overvoltage category
III
Nominal current IN
125 A
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
10 N
Short-time current
4.2 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Semi-sinusoidal
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 35/15
58.5 mm
Conductor cross section AWG min.
18
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
2 conductors with same cross section, solid max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141125
ECLASS 5.0
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Number of connections
2
Rated surge voltage
8 kV
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 32/NS 35
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Height NS 32
56 mm
Conductor cross section AWG max.
2
2 conductors with same cross section, solid min.
0.75 mm²
Connection method
Screw connection
Tightening torque max
3.7 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141125
ETIM 7.0
EC001329
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Nominal cross section
35 mm²
Maximum load current
125 A (with 35 mm² conductor cross section)
Maximum power dissipation for nominal condition
4.06 W
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Height NS 35/7,5
51 mm
Conductor cross section flexible min.
0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
2 conductors with same cross section, stranded max.
10 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
Stripping length
16 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 10.0.1
27141125
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410