1093660 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Maximum load current
  101 A (with 25 mm² conductor cross section)
• Insulating material group
  I
• Nominal current IN
  76 A
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Conductor cross section short circuit testing
  16 mm²
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test duration per axis
  5 h
• Nominal cross section
  16 mm²
• Degree of pollution
  3
• Nominal voltage UN
  400 V
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Acceleration
  30g
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Width
  12.2 mm
• Conductor cross section solid min.
  2.5 mm²
Conductor cross section flexible max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
2 conductors with same cross section, stranded min.
1.5 mm²
Connection method
Screw connection
ECLASS 4.1
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Insulating material
PA
Connection in acc. with standard
IEC 60947-7-1
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
2.5 mm² / 0.7 kg
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 32
52 mm
Conductor cross section AWG max.
4
2 conductors with same cross section, stranded max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²
Stripping length
11 mm
ECLASS 10.0.1
27141125
ECLASS 7.0
27141125
ETIM 6.0
EC001329
UNSPSC 19.0
39121410
Number of connections
2
Flammability rating according to UL 94
V2
Overvoltage category
III
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Short circuit stability result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Semi-sinusoidal
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Height NS 35/15
54.5 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
Tightening torque, min
1.4 Nm
ECLASS 4.0
27141120
ECLASS 9.0
27141125
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Number of levels
1
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
2.43 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 32/NS 35
Short-time current
1.92 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
End cover width
1.8 mm
Height NS 35/7,5
47 mm
Conductor cross section flexible min.
4 mm²
2 conductors with same cross section, solid min.
1.5 mm²
2 conductors with same cross section, solid max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
4 mm²
Tightening torque max
1.5 Nm
ECLASS 5.0
27141120
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Length
42.5 mm
Conductor cross section solid max.
25 mm²
Conductor cross section AWG min.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Screw thread
M4
ECLASS 11.0
27141125
ETIM 2.0
EC000897
ETIM 7.0
EC001329
UNSPSC 6.01
30211811