1104890 Phoenix Contact Electrical Safety Devices

Product Details

• Width
  22.61 mm
• Current consumption
  typ. 12 mA (typically with US)
• Protective circuit
  Serial protection against polarity reversal
• Input current range "0" signal
  < 1 mA
• Output name
  O1, O2, O3, O4
• Nominal output voltage range
  18.5 V DC ... 28.1 V DC (US - 0,7 V)
• Ambient temperature (operation)
  -10 °C ... 55 °C (observe derating)
• Designation
  Air clearances and creepage distances between the power circuits
• Power consumption at US
  typ. 1.08 W (Outputs inactive)
• Number of inputs
  4
• Input voltage range "0" signal
  0 V DC ... 5 V DC
• Cable length
  max. 100 m (per output)
• Limiting continuous current
  100 mA (per channel)
• Max. inductive load
  max. 2.4 mH
• Test pulses
  ≤ 200 µs (Test pulse duration)
• Nominal voltage range
  18.2 V DC ... 27.8 V DC (US - 1 V)
• Degree of protection
  IP20
• Assembly instructions
  Observe derating
• Status display
  1 x LED (green), 2 x LED (orange)
• Torque
  0.5 Nm ... 0.6 Nm
Rated insulation voltage
250 V AC
Degree of pollution
2
Conformance
CE-compliant
Depth
113.6 mm
Maximum altitude
≤ 2000 m (Above sea level)
Filter time
250 ms ±2 ms (Test pulse rate > 500 ms)
Description of the input
configurable (as signal output or reset input)
Input voltage range "1" signal
11 V DC ... 28.8 V DC
Number of outputs
4
Output voltage when switched off
max. 0.1 V
Max. capacitive load
max. 470 nF
Discharging circuit
Yes, internal
Response time
see user manual
Net weight
159 g
Protection class
III (EN 50178)
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Performance level (PL)
e (2-channel wiring)
Overvoltage category
II
ECLASS 10.0.1
27371819
Height
112.58 mm
Ambient temperature (storage/transport)
-20 °C ... 85 °C
Rated control circuit supply voltage US
24 V DC -20 % / +20 % (external fuse, typically 4 A)
Rated control supply current IS
typ. 45 mA (Outputs inactive)
Protective circuit/component
Suppressor diode
Output description
PNP, IEC 61131-2 Typ 0,1
Switching frequency
max. 1/4 x tCycle [Hz]
Error detection time at 1-channel structure
< 3.5 s (OFF state)
Voltage
24 V DC (via A1)
Mounting position
vertical or horizontal
Min. degree of protection of inst. location
IP54
Housing material
Polyamide PA non-reinforced
pluggable
Yes
Screw thread
M3
Stop category
0
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27371819
Max. permissible relative humidity (operation)
95 % (non-condensing)
Max. permissible humidity (storage/transport)
95 % (non-condensing)
Inrush current
max. 600 mA (Δt < 10 ms)
Input name
Reset inputs
Max. permissible overall conductor resistance
1.2 kΩ (Input and reset circuit at US)
Nominal output voltage
24 V DC (Supply via A1)
Leakage current
max. 100 µA
Ohmic load
min. 50 Ω (Observe limiting continuous current)
Maximum inrush current
1.1 A (Δt = 3 s  at Us)
Restart time
min. 5 s (Boot time)
Mounting type
DIN rail mounting
Operating voltage display
1 x green LED
Connection method
Screw connection
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Safety Integrity Level (SIL)
2
Rated surge voltage/insulation
Basic insulation 4 kV between 24 V power supply and I/Os to the housing
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
ECLASS 9.0
27371819
Short-circuit protection
Yes (self-limitation at 1.1 A)
Output voltage range
18.2 V DC ... 27.8 V DC (US - 1 V)
Cycle time
see user manual
Nominal operating mode
100% operating factor
Housing color
yellow
Indication
2 x LED (red)
Stripping length
7 mm
Safety Integrity Level Claim Limit (SIL CL)
3 (2-channel wiring)
Standards/regulations
EN 50178
Vibration (operation)
10 Hz ... 150 Hz, 2g