1105136 Phoenix Contact Electrical Safety Devices

Product Details

• Height
  107.74 mm
• Designation
  Air clearances and creepage distances between the power circuits
• Rated control circuit supply voltage US
  24 V DC -20 % / +20 % (provide external protection, typically 5 A)
• Current consumption
  max. 0.82 A (at terminal point 5/A2 at Us and full load)
• Voltage
  24 V DC (via 24 V)
• Limiting continuous current
  100 mA (per channel)
• Cable length
  max. 100 m (per output)
• Net weight
  175.4 g
• Degree of protection
  IP20
• Ambient temperature (operation)
  -10 °C ... 55 °C (observe derating)
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Protective circuit
  Suppressor diode
• Number of outputs
  16
• Maximum inrush current
  1.1 A (Δt = 3 s  at Us)
• Nominal operating mode
  100% operating factor
• Mounting type
  DIN rail mounting
• Indication
  2 x LED (red)
• Standards/regulations
  EN 50178
• Vibration (operation)
  10 Hz ... 150 Hz, 2g
• Ambient temperature (storage/transport)
  -20 °C ... 85 °C
Rated control supply current IS
typ. 20 mA (Outputs active, without load)
Description
Supply of outputs MO1 ... MO8 via terminal point 5Supply of outputs MO9 ... MO16 via terminal point 6
Output voltage range
18.2 V DC ... 27.8 V DC (US - 1 V)
Switching frequency
max. 1/4 x tCycle [Hz]
Response time
see user manual
Mounting position
vertical or horizontal
Housing color
yellow
Operating voltage display
1 x green LED
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Overvoltage category
II
ECLASS 11.0
27371819
Width
22.61 mm
Max. permissible relative humidity (operation)
95 % (non-condensing)
Power consumption at US
typ. 0.72 W
Output description
PNP, IEC 61131-2 Typ 0,1
Leakage current
max. 100 µA
Protective circuit/component
Suppressor diode
Assembly instructions
Observe derating
Protection class
III (EN 50178)
pluggable
Yes
Degree of pollution
2
ECLASS 9.0
27371819
Depth
113.6 mm
Max. permissible humidity (storage/transport)
95 % (non-condensing)
Inrush current
10 A (at both terminal points 5 and 6, Δt = 1 ms at Us)
Filter time
typ. 1 ms (in the event of voltage dips)
Output voltage when switched off
max. 0.1 V
Short-circuit protection
Yes (self-limitation at 1.1 A)
Restart time
min. 5 s (Boot time)
Housing material
Polyamide PA non-reinforced
Status display
1 x LED (green), 2 x LED (orange)
Connection method
Push-in connection
Conductor cross-section AWG
24 ... 16
Rated insulation voltage
250 V AC
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27371819
Min. degree of protection of inst. location
IP54
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Stripping length
10 mm
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths and housing
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)