1190017 Phoenix Contact Programmable Logic Controllers

Product Details

• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Connection method
  Push-in connection
• Conductor cross section flexible max.
  1.5 mm²
• Output name
  Safe digital outputs
• Transmission speed
  See system in which you use the Smart Element.
• Number of outputs
  4 (1-channel assignment)
• Switching frequency
  1 Hz (0.2 Hz at > 1 A)
• Derating
  up to 40°C: 4 A total currentfrom 40°C: 100 mA/°C derating
• Behavior with inductive overload
  Output can be destroyed
• Test pulses
  Configurable switch-on impulses, fixed shut-off impulses
• Maximum altitude
  ≤ 3000 m (Above sea level)
• Supply voltage range
  19.2 V DC ... 30 V DC (including all tolerances, including ripple)
• Degree of protection at installation location
  min. IP54
• Conductor cross section AWG max.
  16
• Output voltage
  24 V DC
• Output current
  max. 2 A (per output)
• Category
  3 (1-channel assignment)
• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, 2 kV
• Protection class
  III (IEC 61140, EN 61140, VDE 0140-1)
• ECLASS 10.0.1
  27242604
Width
14.9 mm
Air pressure (operation)
70 kPa ... 108 kPa
Holding voltage
> 5 V (min. holding voltage of the connected load)
Reverse voltage resistance to short pulses
no
Operating mode
SafetyBridge
Supply voltage
24 V DC (using card edge connectors)
Safety Integrity Level (SIL)
2 (1-channel assignment)
Depth
62 mm
Load min.
1.5 kΩ (at nominal voltage)
Holding current
> 2 mA (min. holding current of the connected load)
Mounting type
Smart Element slot
Mounting position
any
Stop category in accordance with IEC 60204
0
Safety Integrity Level Claim Limit (SIL CL)
2 (1-channel assignment)
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Interference emission
Noise emission test as per EN 61000-6-4 Class A (industrial applications)
ECLASS 11.0
27242604
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Conductor cross section flexible min.
0.25 mm²
Number
1
Nominal load, inductive
48 VA (1 H; 12 Ω; at nominal voltage)
Stripping length
8 mm
Connection technology
2-conductor
Nominal output voltage
24 V DC
Nominal load, ohmic
48 W (12 Ω, at nominal voltage)
Output voltage when switched off
< 5 V
Output current when switched off
< 2 mA
Color
zinc yellow RAL 1018
Current consumption
min. 21 mA ((Supply from UP with 19.2 V DC, all outputs set, without supply to the actuators))
Performance level (PL)
d (1-channel assignment)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion A, 6 kV contact discharge, 8 kV air discharge
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Air clearances and creepage distances
IEC 60664-1
Height
62.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Air pressure (storage/transport)
66 kPa ... 108 kPa
Designation
EN 62061
Note on the connection method
Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor cross section AWG min.
24
Output description
EN 61131-2
Protective circuit
Short-circuit protection, overload protection of the outputs electronic
Max. capacitive load
10 µF (for ZVEI class 0)
Limitation of the voltage induced on circuit interruption
-15 V
Behavior with overload
Switch-off of the relevant output, restart upon acknowledgment
Net weight
36 g
Degree of pollution
2 (EN 60664-1)
Additional text
using card edge connectors
Power consumption
min. 403 mW
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Test intensity 2, Criterion APower supply: 0.5 kV/0.5 kV (symmetrical/unsymmetrical)Signal lines: 1.0 kV/2.0 kV (symmetrical/unsymmetrical)
Overvoltage category
II (IEC 60664-1)
ECLASS 9.0
27242604
Caption
Dimensions
Ambient temperature (operation)
-25 °C ... 60 °C
Degree of protection
IP20
Conductor cross section solid min.
0.25 mm²
Conductor cross section solid max.
1.5 mm²