1270310 Phoenix Contact Electrical Wires & Cables

Product Details

• Charging mode
  Mode 2, 3, 4
• Ambient temperature (operation)
  -40 °C ... 80 °C
• Number of power contacts
  7 (L1, L2, L3, N, PE, DC+, DC-)
• Rated voltage for power contacts
  480 V AC
• Temperature monitoring
  AC contacts: PTC system (DIN EN 60738-1)
• Mounting hole diameter
  6.80 mm (ø)
• Application
  For charging with alternating current (AC) and with direct current (DC)
• Note
  A protective cap is supplied as standard for the DC and AC contacts.
• Bore dimensions
  117.65 mm x 90 mm, 117.65 mm x 83 mm
• Type of charging current
  DC, AC 3-phase
• Rated current for signal contacts
  2 A
• Number of signal contacts
  2 (CP, PP)
• Resistor coding
  4.7 kΩ (between PE and PP)
• Restrictions to mounting position
  Only 0 to 90 degree frontal inclination possible, see figure
• Housing color
  black
• Material surface of contacts
  Ag
• Cable resistance
  ≤ 37.1 Ω/km
• Cable weight
  7 kg/km
• Maximum voltage for locking detection
  12 V
• Service life insertion cycles
  > 10000 load cycles
Tolerance at the sensor with the recommended measured current
±5K
ECLASS 9.0
27144706
Standards/regulations
DIN EN 60751
Height
140.25 mm
Conductor length
2 m (AC cables)
Maximum charging power
125 kW
Rated current of power contacts
32 A AC
Type of signal transmission
Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
Insertion/withdrawal cycles
> 10000
Mounting position of the locking actuator
Right-side
Design line
Generation 4
External cable diameter
1.6 mm -0.2 mm
Number of positions of theconnectors
4
Typical motor current for locking
0.25 A
Pause time after entry or exit path
3 s
Lock recognition
available
ECLASS 11.0
27144706
Type
Locking actuator right
Design
Generation 4
Note on the connection method
Crimp connection, cannot be disconnected
Max. altitude
4000 m (above sea level)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Number of phases
3
Insulation resistance of neighboring contacts
> 200 MΩ
Insertion force
< 100 N
Screws included in the scope of delivery
none
Material
Plastic
Locking type
Locking in the inserted state with a locking mechanism
Outer sheath, material
PVC
Operating voltage
12 V (Typical power supply at the motor)
Max. dwell time with reverse current
1 s
Mechanical emergency release
available
Temperature range
-40 °C ... 130 °C
Charging standard
CCS type 2
Depth
128.4 mm
Width
108 mm
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated voltage for signal contacts
30 V AC
Temperature measurement
DC contacts: Pt 1000 (DIN EN 60751)
Withdrawal force
< 100 N
Flammability rating
V0
Cable structure
4 x 0.5 mm²
External sheath, color
Green-yellow
Single wire, color
black PP/CS
Reverse current of the motor
max. 1.5 A
Recommended adaptation time
600 ms
Type of sensor
Pt 1000
ECLASS 10.0.1
27144706
Required mounting screws
M6
Customer variations
On request
Minimum bending radius
15 mm
Possible power supply range at the motor
9 V ... 16 V
Cable length
1 m
Recommended measured current
≤ 1 mA (Umax= 16 V DC)
Resistance range
650 Ω ... 1450 Ω