2320102 Phoenix Contact DC/DC Converters

Product Details

• Width with alternative assembly
  122 mm
• Installation distance top/bottom (active)
  50 mm / 50 mm (≤ 70 °C)
• Installation distance top/bottom
  50 mm / 50 mm (≤ 70 °C)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Input voltage range
  18 V DC ... 32 V DC
• Extended input voltage range in operation
  14 V DC ... 18 V DC (Derating)
• Type of protection
  Transient surge protection
• POWER BOOST (IBoost)
  25 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
• Protection against overvoltage at the output (OVP)
  < 35 V DC
• Residual ripple
  < 20 mVPP
• Power loss nominal load max.
  39 W
• Insulation voltage input/output
  1.5 kV (type test)
• Conductor cross section AWG min.
  24
• Conductor cross section AWG max.
  12
• Screw thread
  M3
• Standard - Electrical safety
  EN 60950-1/VDE 0805 (SELV)
• UL approvals
  UL/C-UL listed UL 508
• Discharge in air
  15 kV (Test Level 4)
• Electromagnetic HF field
  EN 61000-4-3
• Signal
  1 kV (Test Level 2 - asymmetrical)
Voltage
10 V (Test Level 3)
Height
130 mm
Installation distance right/left
0 mm / 0 mm (≤ 70 °C)
Depth
125 mm
Installation distance right/left (active)
15 mm / 15 mm (≤ 70 °C)
Ambient temperature (start-up type tested)
-40 °C
Degree of pollution
2
Current consumption
28 A (24 V, IBOOST)
Mains buffering time
typ. 10 ms (24 V DC)
Nominal output voltage
24 V DC ±1 %
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Connection in parallel
Yes, for redundancy and increased capacity
Peak switching voltages nominal load
< 10 mVPP (20 MHz)
ECLASS 11.0
27210901
Width
82 mm
Depth with alternative assembly
85 mm
Degree of protection
IP20
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Recommended breaker for input protection
40 A ... 50 A (Characteristics B, C, D, K)
Nominal output current (IN)
20 A (-25 °C ... 60 °C)
Derating
60 °C ... 70 °C (2.5%/K)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Max. capacitive load
unlimited
Maximum power dissipation in no-load condition
2.2 W
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section solid max.
2.5 mm²
Conductor cross section solid min.
0.2 mm²
EMC requirements for noise emission
EN 61000-6-3
Rail applications
EN 50121-4
Frequency range
0.15 MHz ... 80 MHz
Fast transients (burst)
EN 61000-4-4
Comments
Criterion A
Output
1 kV (Test Level 2 - symmetrical)
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27210900
ETIM 4.0
EC002542
UNSPSC 18.0
39121041
UNSPSC 19.0
39121041
UNSPSC 20.0
39121041
Height with alternative assembly
130 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C derating, 2.5 %/K, startup at -40°C type-tested)
Climatic class
3K3 (in acc. with EN 60721)
Nominal input voltage range
24 V DC
Inrush current
< 26 A (typical)
Protective circuit/component
Varistor
Selective Fuse Breaking (ISFB)
120 A (12 ms)
Connection in series
yes
Active current limitation
approx. 29 A
Efficiency
> 93 %
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Stripping length
8 mm
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Shipbuilding approval
DNV GL (EMC B)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
10 V/m
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27210901
ECLASS 6.0
27210900
ECLASS 4.1
27210900
ETIM 7.0
EC002046
UNSPSC 11
39121004
UNSPSC 12.01
39121004
Net weight
1.7 kg
Protection class
III
Connection method
Screw connection
Conductor cross section flexible max.
2.5 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard – Safety extra-low voltage
EN 60950-1 (SELV)
Standard - Safe isolation
DIN VDE 0100-410
Electrostatic discharge
EN 61000-4-2
Contact discharge
8 kV (Test Level 4)
Input
1 kV (Test Level 2 - symmetrical)
Conducted interference
EN 61000-4-6
I/O/S
asymmetrical
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27210900
ETIM 6.0
EC002046
UNSPSC 7.0901
39121004
UNSPSC 21.0
39121041
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.0
27210900
ECLASS 9.0
27210901
ECLASS 7.0
27210901
UNSPSC 6.01
30211502
UNSPSC 13.2
39121041