2700569 Phoenix Contact Electrical Safety Devices
Part#:2700569
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 588
Dec 22, 2024
Safety relay for emergency stop, safety doors, and light grids up to SILCL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, US = 24 V DC, plug-in screw terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2700569 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Filter time max. 1.5 ms (at S12, S22; test pulse width)
- Description of the input non-safety-related
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -40 °C ... 55 °C (observe derating)
- Designation Air clearances and creepage distances between the power circuits
- Inrush current min. 3 mA
- Input voltage range "0" signal 0 V DC ... 5 V DC (for safe Off; at S12 and S22)
- Current consumption < 10 mA (at S34/24 V)
- Output name Enabling current paths
- Contact type 3 enabling current paths
- Switching capacity min. 60 mW
- Mechanical service life 10x 106 cycles
- Current max. 100 mA
- Typical response time at US < 175 ms (automatic start)
- Min. degree of protection of inst. location IP54
- Operating voltage display 1 x green LED
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Screw thread M3
- Safety Integrity Level (SIL) 3
- Safety Integrity Level Claim Limit (SIL CL) 3
- ECLASS 11.0 27371819
- ECLASS 7.0 27371819
- ETIM 6.0 EC001449
- UNSPSC 21.0 39122205
- Width 12.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Maximum altitude ≤ 2000 m (Above sea level)
- Protective circuit Surge protection Suppressor diode
- Input voltage range "1" signal 20.4 V DC ... 26.4 V DC
- Number of outputs 1 (digital, PNP)
- Limiting continuous current 6 A (observe derating)
- Voltage 22 V DC (Us - 2 V)
- Maximum inrush current 500 mA (Δt = 1 ms at Us)
- Typical release time at US < 20 ms (when controlled via A1 or S12 and S22.)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Nominal operating mode 100% operating factor
- Housing color yellow
- Status display 3 x green LED
- Stripping length 7 mm
- Performance level (PL) e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
- Standards/regulations DIN EN 50178
- Overvoltage category III
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27371900
- UNSPSC 18.0 39122205
- Depth 114.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Rated control supply current IS typ. 80 mA
- Input name Start circuit
- Max. permissible overall conductor resistance 150 Ω
- Output description non-safety-related
- Switching voltage min. 12 V AC/DC
- Output fuse 6 A gL/gG (N/O contact)
- Switching frequency 0.5 Hz
- Typical pickup time at US < 250 ms (when controlled via A1)
- Net weight 172.9 g
- Degree of protection IP20
- Mounting type DIN rail mounting
- pluggable Yes
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Category 4
- Rated insulation voltage 250 V AC
- Shock 15g
- ECLASS 10.0.1 27371819
- ECLASS 4.1 40020600
- ECLASS 9.0 27371819
- UNSPSC 20.0 39122205
- Height 112.2 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Power consumption at US typ. 1.92 W
- Input current range "0" signal 0 mA ... 2 mA (for safe Off; at S12 and S22)
- Number of inputs 1
- Protective circuit/component Suppressor diode
- Contact material AgSnO2
- Sq. Total current 48 A2 (observe derating)
- Short-circuit protection no
- Recovery time < 500 ms
- Mounting position vertical or horizontal
- Assembly instructions See derating curve
- Housing material PBT
- Connection method Screw connection
- Conductor cross-section AWG 24 ... 12
- Stop category 0
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- Conformance CE-compliant
- ECLASS 5.1 27371900
- ECLASS 6.0 27371800
- UNSPSC 13.2 39121501
- UNSPSC 19.0 39122205
- Rated surge voltage/insulation Safe isolation, reinforced insulation 6 kV between input circuit and enabling current path (13/14) and enabling current path (23/24) and enabling current path (33/34)Basic insulation 4 kV between all current paths and housing
- Degree of pollution 2
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.0 40020600
- ETIM 7.0 EC001449
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$232.21
Stock:
588
Select Qty:
$232.21
$232.21 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
