2700589 Phoenix Contact Electrical Safety Devices

Product Details

• ETIM 7.0
  EC001449
• Width
  12.5 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Rated control circuit supply voltage US
  24 V DC -15 % / +10 % (A1/A2)
• Inrush current
  min. 3 mA
• Current consumption
  < 5 mA
• Switching frequency
  max. 0.5 Hz
• Current
  max. 100 mA
• Short-circuit protection
  no
• Nominal operating mode
  100% operating factor
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Degree of protection
  IP20
• Indication
  1 x red LED
• Conductor cross section solid
  0.2 mm² ... 1.5 mm²
• Rated insulation voltage
  250 V AC
• Vibration (operation)
  2g
• IECEx
  Ex nA nC IIC T4 Gc
• REACh SVHC
  Lead 7439-92-1
• ECLASS 6.0
  27371800
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 70 °C (observe derating)
Rated control supply current IS
typ. 75 mA (depending on load M1 +100 mA)
Filter time
max. 2 ms (at A1-A2; test pulse width)
Protective circuit
Serial protection against polarity reversal 33 V suppressor diode
Number of outputs
1 (non-safety-related)
Limiting continuous current
6 A (High demand)
Designation
Air clearances and creepage distances between the power circuits
Net weight
196 g
Mounting type
DIN rail mounting
Housing color
yellow
pluggable
Yes
Stop category
0
Standards/regulations
DIN EN 50178, EN 60079-15
ATEX
 II 3 G Ex nA nC IIC T4 Gc
Environmental simulation test
ISA-S71.04 (G3)
ECLASS 4.0
40020600
ECLASS 5.0
27371900
Height
116.6 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Maximum altitude
≤ 2000 m (Above sea level)
Input voltage range "0" signal
0 V DC ... 5 V DC (for safe Off)
Number of inputs
2 (Non-safety-related start inputs: Y1/Y2)
Max. permissible overall conductor resistance
150 Ω
Voltage at input/start and feedback circuit
24 V DC -15 % / +10 %
Switching capacity
min. 60 mW
Mechanical service life
10x 106 cycles
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Recovery time
500 ms
Assembly instructions
See derating curve
Housing material
PBT
Connection method
Push-in connection
Stripping length
8 mm
Rated surge voltage/insulation
Safe isolation, 6 kV reinforced insulation from control circuit, start circuit, signal output to the enabling current paths, 4 kV/basic insulation between the enabling current paths and between all current paths and housing
Conformance
CE-compliant
UL, USA/Canada
cULus
ECLASS 10.0.1
27371819
ECLASS 9.0
27371819
Input name
Start circuit
Output description
PNP
Contact material
AgSnO2
Switching voltage
min. 12 V AC/DC
Switching capacity according to IEC 60947-5-1
4 A (24 V (DC13))
Output fuse
150 mA fast blow
Typical pickup time at US
< 200 ms (when controlled via A1, automatic start)
Typical release time at US
< 35 ms (when controlled via A1)
Min. degree of protection of inst. location
IP54
Status display
2 x green LEDs
Conductor cross-section AWG
24 ... 16
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Shock
15g
Overvoltage category
III
GL
C, EMC2
ECLASS 11.0
27371819
ECLASS 7.0
27371819
ETIM 6.0
EC001449
Depth
114.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Input current range "0" signal
0 mA ... 2 mA (for safe Off)
Power consumption at US
typ. 1.8 W
Output name
Enabling current path
Contact type
2 enabling current paths
Sq. Total current
60 A2 (observe derating)
Voltage
approx. 22 V DC (Us - 2 V)
Mounting position
vertical, horizontal, with front of module upward
Operating voltage display
1 x yellow LED
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Safety Integrity Level (SIL)
3
Degree of pollution
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
40020600
ECLASS 5.1
27371900