2701513 Phoenix Contact Programmable Logic Controllers
Part#:2701513
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 15
Dec 22, 2024
Axioline E PROFINET device in a plastic housing with 8 IO-Link ports and 4 digital inputs, 24 V DC, M12 fast connection technology
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2701513 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- ECLASS 4.1 27240400
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Note on dimensions The height is 212 mm including fixing clips.
- Protective circuit Overload protection, short-circuit protection of sensor supply
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Mounting type Wall mounting
- Designation connection point Copper cable
- Supply voltage 24 V DC
- Protocols supported SNMP v1
- Description of the input IO-Link ports in digital input (DI) mode
- Equipment type PROFINET-Device
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- UNSPSC 19.0 32151602
- Width 60 mm
- System-specific protocols PROFINET protocols LLDP
- Supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple)
- Nominal input current at UIN typ. 3 mA
- Permissible humidity (operation) 5 % ... 95 %
- Color anthracite
- Note on the connection method D-coded
- Sensor current per channel max. 200 mA (from L+/L-)
- Nominal output voltage 24 V DC
- Designation Actuators (UA)
- Transmission speed 100 Mbps (with auto negotiation)
- Current consumption typ. 28 mA ±15 % (at 24 V DC)
- Number of inputs max. 8 (EN 61131-2 type 1)
- Input voltage range "0" signal -0.3 V DC ... 5 V DC
- Type of protection Overload protection
- Height 185 mm
- Ambient temperature (operation) -25 °C ... 60 °C
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Housing material Pocan®
- Number of outputs max. 8
- Maximum output current per device 1.2 A
- Interference emission Noise emission test as per EN 61000-6-4 Class A
- Protection class III (IEC 61140, EN 61140, VDE 0140-1)
- ETIM 3.0 EC001599
- Permissible humidity (storage/transport) 5 % ... 95 %
- Degree of protection IP65/IP67
- Connection method M12 connector, X01 ... X04 have double occupancy
- Number of positions 4
- Input name Digital inputs at pin 2 for type A ports
- Nominal input voltage UIN 24 V DC
- UNSPSC 21.0 32151602
- Depth 30.5 mm
- Input voltage range "1" signal 15 V DC ... 30 V DC
- Total sensor current max. 1.6 A (from L+/L-)
- Nominal load, ohmic 3.6 W (160 Ω, at nominal load)
- Conformance class B
- Number of supported application relationships (AR) 2
- Connection technology 3-conductor
- ECLASS 10.0.1 27242604
- ECLASS 4.0 27240400
- ETIM 2.0 EC001433
- Input filter time < 1000 µs
- Input frequency 0.5 kHz
- Drill hole spacing 198.5 mm
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- Maximum output current per channel 150 mA
- Net weight 556.8 g
- Number 2
- Output current when switched off max. 300 µA
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
- China RoHS Environmentally Friendly Use Period = 25;
- UNSPSC 6.01 43172015
- ETIM 6.0 EC001599
- Switching rate 1 per second, maximum (at nominal inductive load)
- Test section 24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
- Output description IO-Link ports in digital output (DO) mode
- Nominal load, inductive 3.6 VA (0.8 H, 160 Ω, at nominal load)
- Limitation of the voltage induced on circuit interruption -15 V DC
- Output voltage when switched off max. 1 V
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
- Nominal input current typ. 3 mA
- Signal delay max. 150 µs (when switched on)
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- ECLASS 9.0 27242604
- UNSPSC 11 39121311
- UNSPSC 18.0 32151602
- ECLASS 6.0 27242600
- Behavior with overload Shutdown with automatic restart
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- ETIM 7.0 EC001599
- UNSPSC 13.2 32151602
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
- ECLASS 11.0 27242604
- ECLASS 5.1 27242600
- ETIM 4.0 EC001599
- ECLASS 7.0 27242604
- UNSPSC 7.0901 43201404
- UNSPSC 20.0 32151602
- ECLASS 5.0 27242200
- UNSPSC 12.01 39121311
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$601.48
Stock:
15
Select Qty:
$601.48
$601.48 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
