2703023 Phoenix Contact Data & Networking Devices

Product Details

• Frequency range
  0.15 MHz ... 80 MHz
• Color
  gray
• Comments
  Criterion B
• IEC test classification
  C2
• Overvoltage category
  II
• Supply voltage range
  36 V DC ... 52 V DC 10 % (via PoE)
• Conductor cross section flexible max.
  0.34 mm²
• Current carrying capacity
  ≤ 1.5 A (≤ 60 W (PoE+))
• Wire diameter incl. insulation
  1.6 mm (Terminal block is tested with PVC insulation - other insulation materials available on request)
• Precision
  ± 5 %
• Power consumption
  270 mW (Shield current monitoring)
• Vibration
  B
• Test result
  10g for 16 ms, 1000 shocks in each spatial direction
• Height
  101.3 mm
• External cable diameter
  5.5 mm ... 6.5 mm
• Degree of protection
  IP20 (Manufacturer's declaration)
• Humidity
  B
• Housing material
  Plastic
• Interface 1
  Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
• Conductor cross section solid max.
  0.34 mm²
Contact discharge
± 6 kV (Test Level 3)
Conductor cross section solid min.
0.14 mm²
Rated insulation voltage
85 V DC
ECLASS 6.0
19170100
ETIM 7.0
EC002599
Width
23.8 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Frequency of connections between conductors of the same cross section
10
Net weight
124.2 g
Response time
3 s
Certificate
CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
EMC
B
China RoHS
Environmentally Friendly Use Period = 50 years
Type of test
Continuous shock according to EN 60068-2-27/IEC 60068-2-27
ETIM 6.0
EC002599
Depth
86 mm
Continuous shield current
≤ 1.5 A
MTTF
3281 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Additional text
Please follow the special installation instructions in the documentation!
Standards/regulations
DIN EN 61643-21
Signal
± 1 kV (Data line, asymmetrical)
ECLASS 11.0
19170112
ECLASS 10.0.1
19170112
Ambient temperature (operation)
-40 °C ... 75 °C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Impedance
≤ 1 Ω
Temperature
D
Indirect discharge
± 6 kV
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
19170112
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Altitude
≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Electrical isolation
FE // Ethernet
Connection method
RJ45 jack
Voltage
≤ 10 V
ECLASS 7.0
19170112
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Degree of pollution
2
Designation
Shipbuilding
Pin assignment
1:1
Local diagnostics
Yellow LED
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
22
Switch-on threshold
≥ 30 mA
Transmission length
100 m (including patch cables)
Serial transmission speed
10/100/1000 Mbps
Note on the connection method
CAT5e
Interface 2
Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Maximum output power
60 W
Conductor cross section AWG min.
26
Maximum output current
725 mA (PoE)
Identification
DNV GL
Mounting type
DIN rail mounting, stationary